Control Board Peripherals
About the Control Board Peripherals
Control Board Peripherals is an open source PCB design by ssyps2, published on GitHub. It is a 2-layer board measuring 192.5 × 122.4 mm, with 97 components from 18 distinct parts.
Other key parts include the SN75451BD and TLV2371P. By type, the board carries 44 resistors, 22 capacitors, 21 connectors and 10 ICs.
It belongs with the power & battery designs in this gallery.
From the project
A three-level 3-phase Diode Clamped Inverter, applied as a battery connected Permanent Magnet Synchronous Machine (2kW) drive.
The schematic of PCB is shown in Figure below.
The PCB layout is shown in Figrue below.
Main components on the Control Board Peripherals
Control Board Peripherals bill of materials (BOM)
97 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | SN75451BD | SN75451BD | U1, U2, U3, U4, U5, U6 |
| 4 | TLV2371P | DIP-8_W7.62mm | U7, U8, U9, U10 |
| 2 | 1714971 | CONN_1714971_PXC | J1, J9 |
| 4 | Conn_02x10_Top_Bottom | PinHeader_2x10_P2.54mm_Vertical | J2, J4, J5, J6 |
| 12 | HFBR-1521Z | Broadcom_AFBR-16xxZ_Horizontal | J10, J11, J12, J14, J15, J16, J17, J18 +4 |
| 1 | 1827907 | CONN_1827907 | J13 |
| 1 | Conn_01x03 | CONN_1776511 | J23 |
| 1 | Conn_01x05 | CONN_1827897 | J24 |
| 10 | 0.1u | C_1206_3216Metric | C1, C2, C3, C4, C5, C18, C19, C20 +2 |
| 12 | 4.7u | C_1206_3216Metric | C6, C7, C8, C9, C10, C11, C12, C13 +4 |
| 24 | 100 | R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R11, R12 +16 |
| 3 | 5.6k | R_1206_3216Metric | R7, R18, R20 |
| 3 | 20k | R_1206_3216Metric | R8, R19, R21 |
| 3 | 4.3k | R_1206_3216Metric | R9, R26, R30 |
| 3 | 10k | R_1206_3216Metric | R10, R29, R31 |
| 4 | 330 | R_1206_3216Metric | R17, R32, R33, R44 |
| 2 | 100k | R_1206_3216Metric | R40, R46 |
| 2 | 1k | R_1206_3216Metric | R41, R47 |
Control Board Peripherals design files
The KiCad project lives in the ssyps2/PMSM_Motor_FOC repository on GitHub; these links point at the commit this page was built from.
Control Board Peripherals: common questions
How big is the Control Board Peripherals?
The Control Board Peripherals measures 192.5 × 122.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Control Board Peripherals?
97 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Control Board Peripherals design files?
From the ssyps2/PMSM_Motor_FOC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Control Board Peripherals design in my own project?
The repository has no license, so all rights stay with ssyps2. Use it as a reference, and ask the author before reusing the design.
More boards in PMSM_Motor_FOC
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k