Sutterspeed
StaRadian·sutterspeed·kicad/sutterspeed.kicad_pcb
About the Sutterspeed PCB
Sutterspeed is an open source STM32 PCB design by StaRadian, published on GitHub. It is a 4-layer board measuring 36 × 12.8 mm, with 33 components from 17 distinct parts.
Its main chip is the STM32C071G8U6, from the STM32 family. Other key parts include the ME6211C33M5G-N, USBLC6-2SC6 and TLV9064IPWR. By type, the board carries 14 capacitors, 13 resistors, 4 ICs, 1 diode and 1 inductor.
It belongs with the test & measurement designs in this gallery.
From the project
USB light oscilloscope (STM32C071, 400 kS/s photodiode front end) with a Windows viewer and camera shutter speed measurement
A light oscilloscope on a small USB board: a photodiode front end sampled at 400 kS/s, a Windows viewer that works like a bench scope (time base, vertical scale, trigger, filters, measurements, cursors), and a shutter measurement mode that times a single light pulse — the original purpose of the board was testing camera shutter speeds.
- STM32C071G8 (Cortex-M0+, 48 MHz), USB full speed - TEMD5510 photodiode, transimpedance stage (10 kΩ) followed by gains ×1 / ×11 / ×121 - the three stages are sampled together every 2.5 µs and merged into one wide-range value (the most sensitive stage that is…

Main components on the Sutterspeed
Sutterspeed bill of materials (BOM)
33 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C071G8U6 | QFN-28_4x4mm_P0.5mm | U1 |
| 1 | ME6211C33M5G-N | SOT-23-5 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | TLV9064IPWR | TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 1 | TEMD5510FX01 | Vishay_TEMD5510FX01 | D1 |
| 1 | BLM18PG221SN1D | L_0603_1608Metric | FB1 |
| 1 | 10UF 10uF | C_0603_1608Metric | C1 |
| 3 | 1UF 1uF | C_0402_1005Metric | C2, C3, C5 |
| 4 | 100NF 100nF | C_0402_1005Metric | C4, C6, C9, C10 |
| 1 | 47PF 47pF | C_0402_1005Metric | C7 |
| 2 | 10PF 10pF | C_0402_1005Metric | C8, C13 |
| 3 | 1NF 1nF | C_0402_1005Metric | C11, C12, C14 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 5 | 10K 10k | R_0402_1005Metric | R3, R5, R6, R9, R12 |
| 2 | 1k | R_0402_1005Metric | R7, R13 |
| 1 | 100K 100k | R_0402_1005Metric | R8 |
| 3 | 100 | R_0402_1005Metric | R10, R11, R14 |
Sutterspeed design files
The KiCad project lives in the StaRadian/sutterspeed repository on GitHub; these links point at the commit this page was built from.
Sutterspeed: common questions
What microcontroller does the Sutterspeed use?
The Sutterspeed is built around the STM32C071G8U6, from the STM32 family.
How big is the Sutterspeed PCB?
The Sutterspeed measures 36 × 12.8 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Sutterspeed?
33 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sutterspeed design files?
From the StaRadian/sutterspeed repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sutterspeed design in my own project?
The repository has no license, so all rights stay with StaRadian. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sutterspeed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k