73 open source boards using the ME6211C33M5G-N
Real designs built with the ME6211C33M5G-N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Smartdisplay hardware
BearLaboratory
83.2 × 40 mm46 parts2LGPL-3.0175ESP32
Wifiaudio tx hardware
BearLaboratory
35.4 × 27 mm29 parts2LGPL-3.0110RP2040/RP2350
Skywatch
ozkan
233.7 × 91.5 mm120 parts2LMIT41Microchip SAM
Dynossat edu obc
BHDynamics
42 × 42 mm52 parts4LCERN-OHL-1.214STM32
MorphWatch-STM32
deebot
33.8 × 46 mm63 parts4LNo license12ESP32
Pcb
brainsmoke
60 × 50 mm69 parts2LNo license11ESP32
ESP32Matrix4mining
ccadic
180.3 × 94 mm149 parts2LNo license9ESP32
WalkieTalkie
GuzziFlipFlops
35 × 100 mm66 parts2LMIT7RP2040/RP2350
Watchy hardware v2
xywatch
33.8 × 46 mm62 parts2LNo license7RP2040/RP2350
Core16 LB
ageppert
88.9 × 50.8 mm124 parts2LNo license5Esp flasher
makerspacelt
23.5 × 30.5 mm38 parts2LCERN-OHL-S-2.04Darknet smao
dcbokonon
41 × 33 mm36 parts4LMIT4ESP32
NewMorphS3
ccadic
78.1 × 31.1 mm48 parts4LGPL-3.03ESP32
JellyTracker V0.5.0
YozoraKurage
35.6 × 40.1 mm13 parts2LMIT3RP2040/RP2350
Rtl8762ckf dev board
simplexion
97.8 × 17.8 mm75 parts2LCERN-OHL-P-2.02ESP32
NewMorphS3-v1
ccadic
78.1 × 31.1 mm35 parts2LGPL-3.02STM32
Smu main
PaulBichl
160 × 100 mm240 parts4LNo license1ESP32
NEAToBOARD
halfmarble
100 × 60 mm110 parts2LCERN-OHL-P-2.01RP2040/RP2350
Das4-controller
brandonrc
51.2 × 94 mm58 parts4LMIT1ESP32
PCB-Reflow-Hot-Plate
bjkayani
80 × 60 mm49 parts2LNo license1STM32
Stm32f103c8t6-qwiic
petrovgp
58.4 × 22.7 mm39 parts2LCC0-1.01ESP32
Signal compass
kaizenapps
65 × 65 mm8 parts4LGPL-3.01STM32
Archetype
Fredrik-Reinholdsen
60 × 40 mm139 parts6LNo license0Pmbh
3351666087
86 × 60 mm78 parts2LNo license0M5stack pcb sch check
yuyun2000
66 × 56.5 mm67 parts4LNo license0ESP32
NeuralCard
Brillar0101
85.6 × 54 mm66 parts2LCERN-OHL-P-2.00Raspberry Pi
Hyperion controller
adamhrnciar
34 × 28 mm64 parts2LCERN-OHL-S-2.00ESP32
Before backlabels
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before backlabels
mitra42
64 × 37 mm63 parts2LNo license0ESP32
NeuralCard
Brillar0101
85.6 × 54 mm61 parts2LCERN-OHL-P-2.00ESP32
Hand minute
Jayweiii
159 × 22 mm55 parts2LNo license0RP2040/RP2350
Inspectron sao dc34
d4rkwyng
58 × 52.6 mm51 parts2LMIT0GD32
Tofncan
kaizensparc
20 × 20 mm37 parts4LMIT0STM32
Sutterspeed
StaRadian
36 × 12.8 mm33 parts4LNo license0ESP32
Shapdesk esphome
evgkg
91.2 × 18 mm28 parts2LMIT0STM32
IMU
abstractfoundry
17.4 × 25 mm24 parts2LNo license0
How designs wire the ME6211C33M5G-N
Read from the KiCad layouts of 41 open source designs, one per repository: what each pin of the ME6211C33M5G-N connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 37 of 41 designs, most often 1 µF (then 10 µF).
- The VIN pin has a decoupling capacitor on 35 of 41 designs, most often 1 µF (then 10 µF).
- The EN pin is tied to 5V on 29 of 41 designs (a signal on 12).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 73% · a signal 27% |
|
| GNDpin 2 | Connected to: GND 98% | — |
| ENpin 3 | Connected to: 5V 71% · a signal 29% | — |
| NCpin 4 | Connected to: Not connected 98% | — |
| VOUTpin 5 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smartdisplay hardware by BearLaboratory, ORIGINALERAK3172h breadboard by ccadic, Wifiaudio tx hardware by BearLaboratory and Skywatch by ozkan.
The ME6211C33M5G-N in open source designs
The gallery holds 73 open source boards using the ME6211C33M5G-N from 43 GitHub repositories; a typical one measures about 64 × 37 mm and carries around 63 components.
78% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.
The most starred is Smartdisplay hardware by BearLaboratory.
Parts used alongside the ME6211C33M5G-N
Microcontrollers on boards using the ME6211C33M5G-N
What boards using the ME6211C33M5G-N are built for
ME6211C33M5G-N: common questions
Where can I find a ME6211C33M5G-N reference design?
Each of the 73 boards on this page is a real design using the ME6211C33M5G-N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ME6211C33M5G-N VOUT pin?
The VOUT pin has a decoupling capacitor on 37 of 41 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 41 open source designs using the ME6211C33M5G-N.
What decoupling capacitors do designs use on the ME6211C33M5G-N VIN pin?
The VIN pin has a decoupling capacitor on 35 of 41 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 41 open source designs using the ME6211C33M5G-N.
How is the ME6211C33M5G-N EN pin connected?
The EN pin is tied to 5V on 29 of 41 designs (a signal on 12). Counted from the KiCad layouts of 41 open source designs using the ME6211C33M5G-N.
What parts are used alongside the ME6211C33M5G-N?
The USBLC6-2SC6, CH340C, TP4056, RP2040 and TP4054 appear in the most repositories here.
Which microcontrollers do boards using the ME6211C33M5G-N use?
Most are built on ESP32 (46), STM32 (11), RP2040/RP2350 (6) and GD32 (1).
How big is a typical board using the ME6211C33M5G-N?
The median is 64 × 37 mm, and 78% are two-layer designs.
What is the most popular open source board using the ME6211C33M5G-N?
By GitHub stars, Smartdisplay hardware by BearLaboratory, with 175 stars.
Can I simulate one of these boards using the ME6211C33M5G-N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.