Sb com

starbelt·sb-com·kicad/sb-com.kicad_pcb

Sb com PCB layout, top view — open source Nordic nRF board by starbelt

About the Sb com PCB

Sb com is an open source Nordic nRF PCB design by starbelt, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 43 × 43 mm, with 49 components from 29 distinct parts.

Its main chip is the nRF52833-QDAA-R, from the Nordic nRF family. Other key parts include the nRF21540-QDAA-R and TLV73333PQDBVRQ1. By type, the board carries 21 capacitors, 9 connectors, 6 resistors, 4 inductors, 3 ICs and 2 crystals.

It belongs with the rf & radio designs in this gallery.

From the project

Radio communication (COM) printed circuit board (PCB)

sb-com.pretty: Footprint directory fp-lib-table: Footprint library table sb-com.kicadpcb: KiCad PCB layout sb-com.kicadprl: KiCad project preferences sb-com.kicadpro: KiCad project file sb-com.kicadsch: KiCad schematic layout sb-com.kicadsym: KiCad symbol library sym-lib-table: Symbol library table README.md: This document

Main components on the Sb com

Sb com bill of materials (BOM)

49 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
nRF52833-QDAA-R
IC1
1
nRF21540-QDAA-R
IC2
1
TLV73333PQDBVRQ1
IC3
1
ABM8AIG-32.000MHZ-8-2Z-T
Y1
1
ABS07AIG-32.768KHZ-9-T
Y2
1
A-1JB
J1
1
DX07S016JA1R1500
J2
1
Conn_01x04
J3
4
Conn_01x04
J4, J5, J6, J7
2
Conn_01x16
J8, J9
1
PTS810SJK250SMTR LFS
PTS810SJK250SMTR_LFS
S1
2
SML-D12P8WT86C
LED1, LED2
1
BAT54W-HG3-18
D1
1
LQW18AN4N7B8ZD
L1
1
B82496C3229Z000
L2
1
MLG1005S2N0BTD25
L21
1
MHQ1005P3N0BTD25
L22
5
GCM1885C2A120GA16D
C1, C2, C15, C16, C22
3
AQ0603ARNPO9BN1R0
C3, C21, C23
1
AQ0603ARNPO9BN1R2
C4
Show 9 more
QtyPartRefs
5
CGA3E3X7S2A104K080AB
C5, C7, C11, C14, C26
3
GRT188C71C475KE13D
C6, C18, C19
1
C0603C101J1GACAUTO
C10
2
CGA3E1X7R1C105K080AC
C12, C13
1
GRT188C81A106ME13D
C27
2
SG73S1JTTD1001F
R1, R2
1
CRCW060333K0FKEA
R3
1
CRCW060349K9FKEA
R4
2
SG73P1JTTD5101F
R5, R6

Sb com design files

The KiCad project lives in the starbelt/sb-com repository on GitHub; these links point at the commit this page was built from.

Sb com: common questions

What microcontroller does the Sb com use?

The Sb com is built around the nRF52833-QDAA-R, from the Nordic nRF family.

How big is the Sb com PCB?

The Sb com measures 43 × 43 mm, has 4 copper layers and is 1.5422 mm thick.

How many components are on the Sb com?

49 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sb com design files?

From the starbelt/sb-com repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sb com design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which starbelt chose for the repository.

Can I test firmware for the Sb com without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards