Aipet
state-of-the-art·aipet·custom/m10_mini_dc_control/kicad/m10_mini_dc_control.kicad_pcb
About the Aipet PCB
Aipet is an open source AVR/Arduino PCB design by state-of-the-art, published on GitHub. It is a 2-layer board measuring 11.5 × 10 mm, with 14 components from 12 distinct parts.
Its main chip is the ATtiny13A-MM, from the AVR/Arduino family. Other key parts include the MIC5365-3.3YMT-TZ, DRV8837C and QRE1113GR. By type, the board carries 4 ICs, 4 capacitors, 3 resistors, 1 module, 1 connector and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
AiPet is your favorite soft pet robot
This control board designed to precisely control the 9161C geared M10 mini motor with extended shaft.
In general you just need to connect the board to your I2C bus and power it with 5V of power (in theory voltage regulator allows 2.5-5.5V so the motor can work on lower voltages with slower speed).
You will need to modify the I2CSLAVEADDRESS in firmware, compile it (or use the predefined one) and flash to the MK. After that you will be able to use as many motors as you want.
Main components on the Aipet
Aipet bill of materials (BOM)
14 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny13A-MM | DFN-10-1EP_3x3mm_P0.5mm_EP1.75x2.7mm | U1 |
| 1 | MIC5365-3.3YMT-TZ | MIC5365-3.3YMT-TZ | U2 |
| 1 | DRV8837C | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U3 |
| 1 | QRE1113GR | OnSemi_CASE100CY | U4 |
| 1 | 9161C M10 | 9161C-m10-motor | M1 |
| 1 | Conn_01x04 | PinSocket_1x04_P1.00mm_Vertical | J1 |
| 1 | LED | LED_0201_0603Metric | D1 |
| 2 | 1uF | C_0201_0603Metric | C1, C2 |
| 2 | 0.1uF | C_0201_0603Metric | C3, C4 |
| 1 | 100 | R_0402_1005Metric | R1 |
| 1 | 10k | R_0402_1005Metric | R2 |
| 1 | 100 | R_0201_0603Metric | R3 |
Aipet design files
The KiCad project lives in the state-of-the-art/aipet repository on GitHub; these links point at the commit this page was built from.
Aipet: common questions
What microcontroller does the Aipet use?
The Aipet is built around the ATtiny13A-MM, from the AVR/Arduino family.
How big is the Aipet PCB?
The Aipet measures 11.5 × 10 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Aipet?
14 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Aipet design files?
From the state-of-the-art/aipet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Aipet design in my own project?
The repository has no license, so all rights stay with state-of-the-art. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Aipet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k