16 open source boards using the DRV8837C

Real designs built with the DRV8837C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the DRV8837C

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the DRV8837C connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 1 µF).
  • The VM pin has a decoupling capacitor on 10 of 15 designs, most often 100 nF (then 1 µF).
VMpin 1Connected to: BATT 60% · a signal 40%
  • Decoupling capacitor on 67% · 100 nF (9), 1 µF (4), 10 µF (3)
GNDpin 4, 9Connected to: GND 100%
SLEEPpin 7Connected to: The microcontroller 23%, DRV8837C 23% · not connected 15% · 3.3V 31%
  • Capacitor to GND on 31% · 1 µF (2), 100 nF (2), 22 pF (1)
VCCpin 8Connected to: 3.3V 92%
  • Decoupling capacitor on 92% · 100 nF (11), 1 µF (3), 10 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StarlightEye by will127534, Vna mm ref by loxodes, Control board by paradise-fi and VFD Watch by Pakue95.

The DRV8837C in open source designs

The gallery holds 16 open source boards using the DRV8837C from 15 GitHub repositories; a typical one measures about 45.4 × 52.5 mm and carries around 48 components.

50% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is StarlightEye by will127534.

Microcontrollers on boards using the DRV8837C

DRV8837C: common questions

Where can I find a DRV8837C reference design?

Each of the 16 boards on this page is a real design using the DRV8837C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the DRV8837C VCC pin?

The VCC pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the DRV8837C.

What decoupling capacitors do designs use on the DRV8837C VM pin?

The VM pin has a decoupling capacitor on 10 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the DRV8837C.

What parts are used alongside the DRV8837C?

The LSM6DSR, ABP2_005PG_TRANS, ABP2_015PG_CIS, AMS1117-3.3 and AS5047D appear in the most repositories here.

Which microcontrollers do boards using the DRV8837C use?

Most are built on STM32 (6), AVR/Arduino (2), ESP32 (2) and RP2040/RP2350 (1).

How big is a typical board using the DRV8837C?

The median is 45.4 × 52.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the DRV8837C?

By GitHub stars, StarlightEye by will127534, with 328 stars.

Can I simulate one of these boards using the DRV8837C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part