Sichergo left
steewbsd·Sichergo·sichergo-left/sichergo-left.kicad_pcb
About the Sichergo left PCB
Sichergo left is an open source STM32 PCB design by steewbsd, published on GitHub. It is a 2-layer board measuring 144.7 × 98.2 mm, with 118 components from 29 distinct parts.
Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the AZ1117-3.3, TPD4E05U06DQA, YTS1C0033BBG01 and SN74LVC1G125DBV. By type, the board carries 37 diodes, 28 resistors, 19 switches, 13 capacitors, 7 test points and 6 ICs.
It belongs with the keyboards designs in this gallery.
From the project
Mechanical Keyboard PCB

Main components on the Sichergo left
Sichergo left bill of materials (BOM)
118 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | U2 |
| 1 | YTS1C0033BBG01 | SW-SMD_YIYUAN_YTS1C003XXX | U3 |
| 1 | STM32F103C8TX STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U4 |
| 2 | SN74LVC1G125DBV | SOT-23-5_HandSoldering | U5, U6 |
| 1 | 2N7002 | SOT-23_Handsoldering | Q1 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | PJ-327E-SMT | AUDIO-SMD_PJ-327E-SMT | Audio1 |
| 1 | 1812L050/30PR | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 18 | SW_Push | Gateron_Milky_Yellow | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +10 |
| 1 | MS-22C01-G010 | SW-SMD_6P-L7.2-W3.5-P2.50-LS6.0-TL | SW19 |
| 7 | TestPoint | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP7, TP8, TP9 |
| 1 | TYPE-C 16PIN 2MD(073) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | CPDUR5V0HE-HF | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 18 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4, D8, D9, D10, D14, D15 +10 |
| 18 | CD4148W | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D6, D7, D11, D12, D13, D18, D19 +10 |
| 1 | 120 Ohm @ 100 MHz | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 2 | 10 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 10 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 6 | 0.1 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C8, C9, C11 |
| 1 | 1 µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 10000 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 3 | 5.1 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R8 |
| 6 | 4.7 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R28 |
| 18 | 1 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11, R12, R13, R14, R15, R16, R17 +10 |
| 1 | 1.5 kohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
Sichergo left design files
The KiCad project lives in the steewbsd/Sichergo repository on GitHub; these links point at the commit this page was built from.
Sichergo left: common questions
What microcontroller does the Sichergo left use?
The Sichergo left is built around the STM32F103C8TX, from the STM32 family.
How big is the Sichergo left PCB?
The Sichergo left measures 144.7 × 98.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sichergo left?
118 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sichergo left design files?
From the steewbsd/Sichergo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sichergo left design in my own project?
The repository has no license, so all rights stay with steewbsd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sichergo left without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Sichergo
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k