14 open source boards using the SN74LVC1G125DBV
Real designs built with the SN74LVC1G125DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Elec RPI Robot HAT
pollen-robotics
65 × 30.9 mm122 parts4LApache-2.0108Grippette - USB hub and Dynamixel device
pollen-robotics
65 × 30 mm113 parts4LApache-2.010MARS Dev Board
innate-inc
108.4 × 89.2 mm126 parts6LCERN-OHL-S-2.08STM32
Elec Anything2EtherCAT
pollen-robotics
60 × 70.3 mm200 parts4LApache-2.04Raspberry Pi
Master-Timing-Reference
M0WUT
170 × 100 mm402 parts4LNo license1STM32
MotorControl
steewbsd
101 × 48 mm159 parts4LNo license0Indieduck
armature-ai-labs
65 × 30.9 mm125 parts4LApache-2.00Microduck project
Ngalalalekhaaa
65 × 30.9 mm122 parts4LNo license0STM32
Sichergo left
steewbsd
144.7 × 98.2 mm118 parts2LNo license0Elec Maroilles
pollen-robotics
150 × 25 mm75 parts4LApache-2.00STM32
Gpsdo
AndreasArendt
70 × 70 mm71 parts4LMIT0- schematic only · 199 parts
Hardware underwater
GabrielFMartinez
199 partsNo license0 288 cpld beta.
zambujal
37.2 × 37.3 mm32 parts4LNo license2STM32
FlightManagement
steewbsd
50 × 50 mm108 parts4LNo license0
How designs wire the SN74LVC1G125DBV
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the SN74LVC1G125DBV connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF).
- Pin 4 has a pull-up to 3.3V on 8 of 12 designs, most often 10 kΩ.
- Pin 2 has a pull-up to 3.3V on 7 of 12 designs, most often 10 kΩ.
- The OE pin has a series resistor on 6 of 12 designs, most often 0 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OEpin 1 | Connected to: SN74LVC1G126DBVR 50% · GND 33% |
|
| Pin 2 | Connected to: SN74LVC1G126DBVR 50% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: 74LVC1G08 33% |
|
| VCCpin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Elec RPI Robot HAT by pollen-robotics, Grippette - USB hub and Dynamixel device by pollen-robotics, MARS Dev Board by innate-inc and Elec Anything2EtherCAT by pollen-robotics.
The SN74LVC1G125DBV in open source designs
The gallery holds 14 open source boards using the SN74LVC1G125DBV from 13 GitHub repositories; a typical one measures about 65 × 48 mm and carries around 122 components.
92% use four copper layers or more, and 50% carry an open source license.
The most starred is Elec RPI Robot HAT by pollen-robotics.
Parts used alongside the SN74LVC1G125DBV
Microcontrollers on boards using the SN74LVC1G125DBV
What boards using the SN74LVC1G125DBV are built for
SN74LVC1G125DBV: common questions
Where can I find a SN74LVC1G125DBV reference design?
Each of the 14 boards on this page is a real design using the SN74LVC1G125DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G125DBV VCC pin?
The VCC pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the SN74LVC1G125DBV.
What pull-up resistor is used on the SN74LVC1G125DBV pin 4?
Pin 4 has a pull-up to 3.3V on 8 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the SN74LVC1G125DBV.
What pull-up resistor is used on the SN74LVC1G125DBV pin 2?
Pin 2 has a pull-up to 3.3V on 7 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the SN74LVC1G125DBV.
What parts are used alongside the SN74LVC1G125DBV?
The SN74LVC1G126DBVR, 74LVC1G08, AP63205, LM5050-1 and SIT3088E appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G125DBV use?
Most are built on STM32 (5) and Raspberry Pi (1).
How big is a typical board using the SN74LVC1G125DBV?
The median is 65 × 48 mm, and 8% are two-layer designs.
What is the most popular open source board using the SN74LVC1G125DBV?
By GitHub stars, Elec RPI Robot HAT by pollen-robotics, with 108 stars.
Can I simulate one of these boards using the SN74LVC1G125DBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.