FX3 to Tang Nano 20K Adapter
About the FX3 to Tang Nano 20K Adapter PCB
FX3 to Tang Nano 20K Adapter is an open source PCB design by Stefan-Olt, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 54.4 × 49.3 mm, with 44 components from 11 distinct parts.
By type, the board carries 33 resistors, 5 connectors and 5 capacitors.
It belongs with the rf & radio designs in this gallery.
From the project
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
Passive adapter to use a Tang Nano 20K on MISRC that is designed to connect to a FX3 board.
FX3 to Tang Nano 20K Adapter bill of materials (BOM)
44 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BWSMA-KE-Z001 Conn_01x20_Socket | PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | 61300811121 Conn_01x20_Socket | PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | 61302021121 GPIFII_J6 | PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | 61302021121 GPIFII_J7 | PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J32 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RC1 |
| 5 | KGM21AR71H105KU 1µ | C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 28 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R0, R6, R7, R8, R9, R10, R11, R12 +20 |
| 1 | SDR10EZPF1002 R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | ERJ-P6WF1000V R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | RCC08051K00FKEA R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
FX3 to Tang Nano 20K Adapter design files
The KiCad project lives in the Stefan-Olt/MISRC repository on GitHub; these links point at the commit this page was built from.
FX3 to Tang Nano 20K Adapter: common questions
How big is the FX3 to Tang Nano 20K Adapter PCB?
The FX3 to Tang Nano 20K Adapter measures 54.4 × 49.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FX3 to Tang Nano 20K Adapter?
44 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FX3 to Tang Nano 20K Adapter design files?
From the Stefan-Olt/MISRC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FX3 to Tang Nano 20K Adapter design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which Stefan-Olt chose for the repository.
More boards in MISRC
Similar boards
Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0246
Open smartwatch gps
45 × 41 mm67 parts4LGPL-3.0241
Module17 HMI
M17-Project
97 × 80.9 mm49 parts4LCERN-OHL-W-2.0129