HardLabs

MF RMP Panel

stefanofinetti·MF_RMP_Panel·Kicad Files/RMP_V3.kicad_pcb

MF RMP Panel PCB layout, top view — open source AVR/Arduino board by stefanofinetti
Simulate this board

About the MF RMP Panel PCB

MF RMP Panel is an open source AVR/Arduino PCB design by stefanofinetti, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 142 × 83 mm, with 115 components from 40 distinct parts.

Its main chip is the ATMEGA2560, from the AVR/Arduino family. Other key parts include the EC11EBB24C03, PCA9548APW, AMS1117-3.3, CH340G and AMS1117-5.0. By type, the board carries 48 resistors, 24 diodes, 16 capacitors, 13 switches, 6 ICs and 5 connectors.

From the project

Repository for the RMP Panel for MobiFlight

This code and all the items are release under GPLv3.0 license. Feel free to use as you wish as long as you redistribute the source code. It would be nice a mention, though, if you use this work. I invested a good amount of hours just to make it for the amazing MobiFlight community.

This project couldn't have seen the light without the excellent work, and kind support, of GaGagu and ElRal. Their work is amazing, so please have a look at their repositories

Main components on the MF RMP Panel

EC11EBB24C03ATMEGA2560PCA9548APWAMS1117-3.3CH340GAMS1117-5.0

MF RMP Panel bill of materials (BOM)

115 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
EC11EBB24C03
ENCODER
U1
1
ATMEGA2560
ATMega2560
U2
1
PCA9548APW
U3
1
AMS1117-3.3
U4
1
CH340G
U5
1
AMS1117-5.0
U6
1
VHF Active OLED
J1
1
VHF Standby OLED
J2
1
BootLoader
J3
1
PJ-102A
CUI Inc.
J4
1
USB_C_PLUG_USB2.0
USB_C_Plug_USB2.0
P1
1
Power Selector
JP1
1
VHF1_SW
SW1
1
VHF2_SW
SW2
1
VHF3_SW
SW3
1
C4364985
XFER_SW
SW4
1
HF1
SW6
1
HF2
SW7
1
C4364809
AM
SW8
1
C4364985
NAV
SW9
Show 20 more
QtyPartRefs
1
C4364985
VOR
SW10
1
C4364985
ILS
SW11
1
C4364985
MLS
SW12
1
C4364985
ADF
SW13
1
C4364985
BFO
SW14
1
12MHz
XT12MHz1
1
16MHz
XT16MHz1
13
EMERALD
D1, D2, D3, D4, D5, D6, D7, D9 +5
1
LED
D8
10
WHITE
D15, D16, D17, D18, D19, D20, D21, D22 +2
10
100NF
100nF
C1, C2, C3, C4, C5, C8, C11, C13 +2
1
10UF
10uF
C6
5
22PF
22pF
C7, C9, C10, C12, C14
14
200
R1, R2, R3, R4, R18, R19, R20, R21 +6
22
100
R5, R6, R7, R8, R9, R10, R23, R24 +14
6
4.7K
R11, R12, R13, R14, R15, R16
2
10K
R17, R22
1
220
R45
2
1K
R46, R47
1
1.5K
R48

MF RMP Panel design files

The KiCad project lives in the stefanofinetti/MF_RMP_Panel repository on GitHub; these links point at the commit this page was built from.

MF RMP Panel: common questions

What microcontroller does the MF RMP Panel use?

The MF RMP Panel is built around the ATMEGA2560, from the AVR/Arduino family.

How big is the MF RMP Panel PCB?

The MF RMP Panel measures 142 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MF RMP Panel?

115 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MF RMP Panel design files?

From the stefanofinetti/MF_RMP_Panel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MF RMP Panel design in my own project?

Yes, under the terms of its GPL-3.0 license, which stefanofinetti chose for the repository.

Can I test firmware for the MF RMP Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards