Elec4450-project
stevfu·elec4450-project·BuckConverter/BuckConverter.kicad_pcb
About the Elec4450-project PCB
Elec4450-project is an open source PCB design by stevfu, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 145.5 × 149.6 mm, with 43 components from 27 distinct parts.
Other key parts include the LM358AP, LAUNCHXL-F28379D, UCC5304DWVR and TMV 0512SHI. By type, the board carries 13 resistors, 12 capacitors, 7 diodes, 5 connectors, 4 ICs and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
A unidirectional buck converter with active filtering and control, project for ELEC4450: Power Electronics,
The following specifications for this converter are:
The layout, schematic and PCB design of the buck converter was done in KiCAD.
Main components on the Elec4450-project
Elec4450-project bill of materials (BOM)
43 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358AP | P8 | U1 |
| 1 | LAUNCHXL-F28379D | MOD_LAUNCHXL-F28379D | U2 |
| 1 | UCC5304DWVR | SOIC8_DWV_TEX | U3 |
| 1 | TMV 0512SHI | TMV-HI_SINGLE_TRP | U4 |
| 1 | IRF540N | TO-220-3_Vertical | Q1 |
| 5 | BU-P72930 Conn_01x01_Pin | Banana_Jack_1Pin | J1, J2, J3, J4, J5 |
| 1 | SS310 | D_SMA | D1 |
| 5 | IR26-21C_L110_TR8 | LED_1206_3216Metric | D2, D3, D4, D5, D7 |
| 1 | US2AA | D_SMA | D6 |
| 1 | 5900-333-RC 33mH | IND_BOURNS_5900 | L1 |
| 1 | C2012X5R1V226M125AC 22u | C_0805_2012Metric | C1 |
| 3 | TMCP1E105MTRF 1u | C_0805_2012Metric | C2, C6, C7 |
| 1 | 100ZLH470MEFC16X31.5 470u | CP_Radial_D18.0mm_P7.50mm | C3 |
| 1 | GRM21BC72A105KE01L 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | GRM31CC72A475KE11L 4.7 µF | CAPC3216X190N | C5 |
| 1 | TMCP1E105MTRF 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 600F330FT250XT 33p | CAP_600F0R1AT250T_ATC | C9 |
| 1 | F951C106MPAAQ2 10u | C_0805_2012Metric | C10 |
| 1 | C0805C224K5RACTU 220n | C_0805_2012Metric | C11 |
| 1 | GRM21BR61E106KA73L 10u | C_0805_2012Metric | C12 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RMCF0805FT10K0 10k | R_0805_2012Metric | R1, R4 |
| 2 | RT0603BRC07500RL 500 | R_0603_1608Metric | R2, R3 |
| 5 | ERU-P06F3301V 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R13 |
| 1 | RC0805FR-0751RL 51 | RC0805N_YAG | R9 |
| 1 | CRCW08057R15FKEA 7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | RC0805FR-0712RL 12 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | RCP1206W50R0JTP 50 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
Elec4450-project design files
The KiCad project lives in the stevfu/elec4450-project repository on GitHub; these links point at the commit this page was built from.
Elec4450-project: common questions
How big is the Elec4450-project PCB?
The Elec4450-project measures 145.5 × 149.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Elec4450-project?
43 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Elec4450-project design files?
From the stevfu/elec4450-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Elec4450-project design in my own project?
Yes, under the terms of its GPL-3.0 license, which stevfu chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k