HardLabs

Bp

STM32World·hardware·stmw-bp-6/bp.kicad_pcb

Bp PCB layout, top view — open source STM32 board by STM32World

About the Bp PCB

Bp is an open source STM32 PCB design by STM32World, published on GitHub under the Custom license license. It is a 2-layer board measuring 100 × 86 mm, with 7 components from 2 distinct parts.

Its main chip is the X1611WVS-98-9TV01, from the STM32 family. By type, the board carries 5 ICs and 2 connectors.

From the project

STM32World Development Modules

Documentation is in our wiki: https://stm32world.com/wiki/STM32World

Main components on the Bp

X1611WVS-98-9TV01

Bp bill of materials (BOM)

7 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
5
X1611WVS-98-9TV01
U1, U2, U3, U4, U5
2
CONN_02X25_ODD_EVEN
Conn_02x25_Odd_Even
J1, J2

Bp design files

The KiCad project lives in the STM32World/hardware repository on GitHub; these links point at the commit this page was built from.

Bp: common questions

What microcontroller does the Bp use?

The Bp is built around the X1611WVS-98-9TV01, from the STM32 family.

How big is the Bp PCB?

The Bp measures 100 × 86 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bp?

7 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bp design files?

From the STM32World/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Bp design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Bp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in hardware

Similar boards