Prgstl

STM32World·hardware·prgstl/prgstl.kicad_pcb

Prgstl PCB layout, top view — open source STM32 board by STM32World

About the Prgstl PCB

Prgstl is an open source STM32 PCB design by STM32World, published on GitHub under the Custom license license. It is a 2-layer board measuring 76.2 × 50.8 mm, with 51 components from 29 distinct parts.

Its main chip is the C6186, from the STM32 family. Other key parts include the SRV05-4 and STM32F103CBTX. By type, the board carries 18 resistors, 10 jumpers, 10 capacitors, 4 connectors, 4 diodes and 3 ICs.

From the project

STM32World Development Modules

Documentation is in our wiki: https://stm32world.com/wiki/STM32World

Main components on the Prgstl

Prgstl bill of materials (BOM)

51 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C6186
AMS1117-3.3``
U1
1
SRV05-4
U2
1
STM32F103CBTX
STM32F103CBTx
U3
1
S9013
Q1
1
X_8MHZ
Y1
1
C165948
~
J1
1
STM32WORLD_CONNECTOR_1
J2
1
STM32WORLD_CONNECTOR_2
J3
1
STM32WORLD_BOARD
J4
2
~
JP1, JP5
8
~
JP2, JP3, JP4, JP6, JP7, JP8, JP9, JP10
1
C8598
~
D1
1
LED_GREEN_0603
D2
1
LED_BLUE_0603
D3
1
LED_RED_0603
D4
2
C_10UF_0805
C1, C6
1
C_1UF_0603
C2
5
C_100NF_0603
C3, C4, C5, C7, C8
2
C_20PF_0603
C9, C10
2
R_5.1K_0603
R1, R2
Show 9 more
QtyPartRefs
3
R_220_0603
R3, R5, R6
1
R_1.5K_0603
R4
2
R_10K_0603
R7, R14
1
R_33K_0603
R8
2
R_22_0603
R9, R10
2
R_100_0603
R11, R16
2
R_100K_0603
R12, R13
1
DNP
R15
2
R_4.7K_0603
R17, R18

Prgstl design files

The KiCad project lives in the STM32World/hardware repository on GitHub; these links point at the commit this page was built from.

Prgstl: common questions

What microcontroller does the Prgstl use?

The Prgstl is built around the C6186, from the STM32 family.

How big is the Prgstl PCB?

The Prgstl measures 76.2 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Prgstl?

51 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Prgstl design files?

From the STM32World/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Prgstl design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Prgstl without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in hardware

Similar boards