Ws2812
STM32World·hardware·ws2812/ws2812.kicad_pcb
About the Ws2812 PCB
Ws2812 is an open source STM32 PCB design by STM32World, published on GitHub under the Custom license license. It is a 2-layer board measuring 76.2 × 50.8 mm, with 74 components from 6 distinct parts.
Its main chip is the WS2812E, from the STM32 family. By type, the board carries 50 ICs, 21 jumpers and 3 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
STM32World Development Modules
Documentation is in our wiki: https://stm32world.com/wiki/STM32World
Main components on the Ws2812
Ws2812 bill of materials (BOM)
74 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 50 | WS2812E | LED-SMD_4P-L3.7-W3.5-P1.75-BR-SK6812MINI | U1, U2, U3, U4, U5, U6, U7, U8 +42 |
| 1 | STM32WORLD_BASE STM32WORLD_BOARD | STM32WORLD_BOARD | J1 |
| 1 | STM32WORLD_CONNECTOR_1 | PinSocket_2x20_P2.54mm_Vertical_Stackable | J2 |
| 1 | STM32WORLD_CONNECTOR_2 | PinSocket_2x20_P2.54mm_Vertical_Stackable | J3 |
| 1 | ~ | SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP1 |
| 20 | ~ | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 +12 |
Ws2812 design files
The KiCad project lives in the STM32World/hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutws2812/ws2812.kicad_pcb
- Schematicws2812/ws2812.kicad_sch
- BOMdws2812/dws2812_a_bom.csv
Ws2812: common questions
What microcontroller does the Ws2812 use?
The Ws2812 is built around the WS2812E, from the STM32 family.
How big is the Ws2812 PCB?
The Ws2812 measures 76.2 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ws2812?
74 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ws2812 design files?
From the STM32World/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ws2812 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Ws2812 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in hardware
STM32
Proto
STM32World
76.2 × 50.8 mm307 parts2LCustom license6STM32
Dws2812
STM32World
76.2 × 50.8 mm129 parts2LCustom license6STM32
Prgstl
STM32World
76.2 × 50.8 mm51 parts2LCustom license6STM32
Mcustm32f446
STM32World
76.2 × 50.8 mm35 parts2LCustom license6STM32
Stmw mcu stm32f407
STM32World
70 × 51.5 mm34 parts4LCustom license6STM32
Mcustm32f411
STM32World
76.2 × 50.8 mm30 parts2LCustom license6STM32
Mcucn32v307
STM32World
76.2 × 50.8 mm29 parts2LCustom license6STM32
Mcustm32f103
STM32World
76.2 × 50.8 mm29 parts2LCustom license6STM32
Mcustm32g030
STM32World
76.2 × 50.8 mm22 parts2LCustom license6STM32
Stmw bp-5
STM32World
100 × 86 mm7 parts2LCustom license6STM32
Bp
STM32World
100 × 86 mm7 parts2LCustom license6
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k