HardLabs

${TITLE}

STM32World·hardware·mcustm32g030/mcustm32g030.kicad_pcb

${TITLE} PCB layout, top view — open source STM32 board by STM32World
Simulate this board

About the ${TITLE} PCB

${TITLE} is an open source STM32 PCB design by STM32World, published on GitHub under the Custom license license. It is a 2-layer board measuring 76.2 × 50.8 mm, with 22 components from 14 distinct parts.

Its main chip is the AMS1117-3.3, from the STM32 family. Other key parts include the STM32G030C6. By type, the board carries 9 capacitors, 4 resistors, 2 ICs, 2 switches, 2 diodes and 1 crystal.

From the project

STM32World Development Modules

Documentation is in our wiki: https://stm32world.com/wiki/STM32World

Main components on the ${TITLE}

AMS1117-3.3STM32G030C6

${TITLE} bill of materials (BOM)

22 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32G030C6
U2
1
X_16MHZ
Y1
1
STM32WORLD_BASE
J1
1
JUMPER_2_BRIDGED
Jumper_2_Bridged
JP1
2
C455281
~
SW1, SW2
1
C72043
GR
D1
1
C72041
BL
D2
2
10UF
10uF
C1, C7
1
1UF
1uF
C2
4
100NF
100nF
C3, C4, C5, C6
2
20PF
20pF
C8, C9
2
10K
10k
R1, R4
2
220R
R2, R3

${TITLE} design files

The KiCad project lives in the STM32World/hardware repository on GitHub; these links point at the commit this page was built from.

${TITLE}: common questions

What microcontroller does the ${TITLE} use?

The ${TITLE} is built around the AMS1117-3.3, from the STM32 family.

How big is the ${TITLE} PCB?

The ${TITLE} measures 76.2 × 50.8 mm, has 2 copper layers and is 1.2 mm thick.

How many components are on the ${TITLE}?

22 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ${TITLE} design files?

From the STM32World/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ${TITLE} design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the ${TITLE} without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in hardware

Similar boards