HardLabs

Output conn ODU 7x6 16ch fwd

stockmann-lab·shim_amp_hardware_linear·pcbs/output conn ODU 7x6 16ch fwd/output conn ODU 7x6 16ch fwd.kicad_pcb

Output conn ODU 7x6 16ch fwd PCB layout, top view — open source board by stockmann-lab

About the Output conn ODU 7x6 16ch fwd PCB

Output conn ODU 7x6 16ch fwd is an open source PCB design by stockmann-lab, published on GitHub. It is a 4-layer board measuring 72 × 114 mm, with 46 components from 4 distinct parts.

By type, the board carries 42 capacitors and 4 connectors.

It belongs with the audio designs in this gallery.

From the project

Hardware related to open-source shim amplifier development for MRI research

This repo contains files related to the MGH "Revision D" linear amplifier development (and associated projects). The shim amplifiers are designed to drive stable currents (up to 4A/channel or more if channels are ganged together in parallel) in shim coils and other inductive loads used for MRI research experiments. The amplifiers are designed to operate inside the MRI shielded room without causing image degradation due to RF interference.

Output conn ODU 7x6 16ch fwd bill of materials (BOM)

46 components, 4 distinct parts.

QtyPartRefs
1
ODU-MAC_Zero_6x7
J1
2
Conn_02x25_Odd_Even
J2, J3
1
Conn_02x15_Odd_Even
J4
42
C
C1, C2, C3, C4, C5, C6, C7, C8 +34

Output conn ODU 7x6 16ch fwd design files

The KiCad project lives in the stockmann-lab/shim_amp_hardware_linear repository on GitHub; these links point at the commit this page was built from.

Output conn ODU 7x6 16ch fwd: common questions

How big is the Output conn ODU 7x6 16ch fwd PCB?

The Output conn ODU 7x6 16ch fwd measures 72 × 114 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Output conn ODU 7x6 16ch fwd?

46 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Output conn ODU 7x6 16ch fwd design files?

From the stockmann-lab/shim_amp_hardware_linear repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Output conn ODU 7x6 16ch fwd design in my own project?

The repository has no license, so all rights stay with stockmann-lab. Use it as a reference, and ask the author before reusing the design.

More boards in shim_amp_hardware_linear

Similar boards