Nice nano mesh
Straverk·nice-nano-mesh·kicad-pcb/nice!nano-pcb.kicad_pcb
About the Nice nano mesh PCB
Nice nano mesh is an open source PCB design by Straverk, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 88 × 42.2 mm, with 16 components from 13 distinct parts.
Other key parts include the nice_nano, LoRa-E220-900M22S, TFT_320x240 and LX-LC535. By type, the board carries 4 ICs, 4 capacitors, 3 switches, 2 battery holders and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
PCB for nice!nano board and LoRa LX-LC535 radio module for mesh nets likes meshtastic and meshcore
Main components on the Nice nano mesh
Nice nano mesh bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nice_nano | nice_nano | U1 |
| 1 | LoRa-E220-900M22S | LoRa-E220-900M22S | U2 |
| 1 | TFT_320x240 | TFT-240x320-2.4 | U3 |
| 1 | LX-LC535 | LX-LC535 | U4 |
| 1 | Conn_Coaxial | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1 |
| 2 | Battery_Cell | BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 1 | 200k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_ADC_B1 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_ADC_T1 |
| 2 | SW_Push | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1, SW2 |
| 1 | SW_Nidec_CAS-120A1 | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW3 |
| 1 | 100uF | C_Elec_5x5.8 | C1 |
| 1 | 220uF | C_Elec_6.3x7.7 | C2 |
| 2 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
Nice nano mesh design files
The KiCad project lives in the Straverk/nice-nano-mesh repository on GitHub; these links point at the commit this page was built from.
Nice nano mesh: common questions
How big is the Nice nano mesh PCB?
The Nice nano mesh measures 88 × 42.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nice nano mesh?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nice nano mesh design files?
From the Straverk/nice-nano-mesh repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nice nano mesh design in my own project?
Yes, under the terms of its GPL-3.0 license, which Straverk chose for the repository.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568