Buck Converter

SubhEE27·Buck_Converter

Buck Converter PCB layout, top view — open source board by SubhEE27

About the Buck Converter PCB

Buck Converter is an open source PCB design by SubhEE27, published on GitHub. It is a 2-layer board measuring 33 × 24.5 mm, with 12 components from 10 distinct parts.

Other key parts include the LMR51450FNDRRR. By type, the board carries 6 capacitors, 4 resistors, 1 IC and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

LMR51450-based DC-DC buck converter design in KiCad. Converts 10–35 V input to a stable 7.6 V, 4 A output. Includes schematic, PCB layout, BOM, and component selection based on TI datasheet guidelines. Uses X7R capacitors for reliable performance and low ripple.

This project implements a DC-DC Buck Converter using the Texas Instruments LMR51450 regulator IC. The design converts an input range of 10 V to 35 V into a regulated 7.6 V output at up to 4 A continuous current.

The schematic, PCB layout, and BOM are included, designed in KiCad.

- Feedback Network - Output voltage set using divider resistors: ~90 kΩ (top), 10 kΩ (bottom).

Main components on the Buck Converter

Buck Converter bill of materials (BOM)

12 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LMR51450FNDRRR
U1
1
3.7 uH
L1
2
CC0402KRX7R7BB104
C1, C2
2
KRT31KR71H475KH01K
C3, C4
1
75uF
C5
1
27pF
C6
1
14.3k
R1
1
100k
R2
1
12k
R3
1
1k
R4

Buck Converter design files

The KiCad project lives in the SubhEE27/Buck_Converter repository on GitHub; these links point at the commit this page was built from.

Buck Converter: common questions

How big is the Buck Converter PCB?

The Buck Converter measures 33 × 24.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Buck Converter?

12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Buck Converter design files?

From the SubhEE27/Buck_Converter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Buck Converter design in my own project?

The repository has no license, so all rights stay with SubhEE27. Use it as a reference, and ask the author before reusing the design.

Similar boards