Blinky
sudhansh004·Blinky-PCB
About the Blinky PCB
Blinky is an open source PCB design by sudhansh004, published on GitHub. It is a 2-layer board measuring 33 × 26 mm, with 7 components from 6 distinct parts.
By type, the board carries 3 resistors, 1 IC, 1 battery holder, 1 diode and 1 capacitor.
It belongs with the power & battery designs in this gallery.
From the project
This project contains the KiCad PCB design files for a simple led blinking circuit using a 7555 Timer IC. The circuit blinks the LED at a fixed frequency using an astable multivibrator configuration.
This project contains the KiCad PCB design files for a simple led blinking circuit using a 7555 Timer IC. The circuit blinks the LED at a fixed frequency using an astable multivibrator configuration.
Here you go now feel free to submit issues or improvements via pull requests!

Blinky bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CR2032 | battery holder | BT1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 1 | 470K 470k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Blinky design files
The KiCad project lives in the sudhansh004/Blinky-PCB repository on GitHub; these links point at the commit this page was built from.
- Layoutblinky.kicad_pcb
- Schematicblinky.kicad_sch
- BOMBill of materials.csv
Blinky: common questions
How big is the Blinky PCB?
The Blinky measures 33 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blinky?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Blinky design files?
From the sudhansh004/Blinky-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Blinky design in my own project?
The repository has no license, so all rights stay with sudhansh004. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k