Digital Timer Switch
sudo-junkie·Digital_Timer_Switch·SRC/Digital_Timer_Switch.kicad_pcb
About the Digital Timer Switch PCB
Digital Timer Switch is an open source AVR/Arduino PCB design by sudo-junkie, published on GitHub. It is a 2-layer board measuring 82.6 × 76.2 mm, with 65 components from 35 distinct parts.
Its main chip is the ATMEGA328P-MUR, from the AVR/Arduino family. Other key parts include the TLV75733PDBVR, CPC1998J and SX1M32.768KM10F30TNN. By type, the board carries 25 capacitors, 13 resistors, 7 switches, 4 ICs, 3 transistors and 3 connectors.
From the project
ATMEGA328-based timer switch
KiCad 7 design files (schematic, PCB, BOM, gerbers) for ATMEGA328P-based timer switch

Main components on the Digital Timer Switch
Digital Timer Switch bill of materials (BOM)
65 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV75733PDBVR TLV75733PDBV | SOT-23-5 | U201 |
| 1 | CPC1998J | CPC1998J | U202 |
| 1 | ATMEGA328P-MUR ATmega328P-M | QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U301 |
| 1 | SX1M32.768KM10F30TNN SX1M32.768KM10F30TN | Crystal_SMD_2016-4Pin_2.0x1.6mm | U302 |
| 2 | AO3401 AO3401A | SOT-23 | Q101, Q201 |
| 1 | MMBT3904 | SOT-23 | Q401 |
| 1 | TJ2116000UYGBC 16MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y301 |
| 1 | DB128V-5.08-2P-GN-S AC_IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J101 |
| 1 | S2B-XH-A-1(LF)(SN) Conn_VIN | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J102 |
| 1 | DB128V-5.08-2P-GN-S AC_OUT | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J103 |
| 1 | WC1602A | WC1602A | DS401 |
| 1 | 40015000000 5A | Fuse_Littelfuse_395Series | F201 |
| 1 | VDR-14D301K 300V | RV_Disc_D15.5mm_W5mm_P7.5mm | MOV201 |
| 1 | HLK-PM03 | Converter_ACDC_HiLink_HLK-PMxx | PS201 |
| 1 | 3314J-1-103E 10K | Potentiometer_Bourns_3314J_Vertical | RV401 |
| 1 | TS-1095TS-B2C2-D2 SW_AUTO | SW_SPST_Omron_B3FS-105xP | SW301 |
| 1 | TS-1095TS-B2C2-D2 SW_TIME | SW_SPST_Omron_B3FS-105xP | SW302 |
| 1 | TS-1095TS-B2C2-D2 SW_DAY | SW_SPST_Omron_B3FS-105xP | SW303 |
| 1 | B3U-1000P SW_RST | SW_SPST_B3U-1000P | SW304 |
| 1 | TS-1095TS-B2C2-D2 SW_HOUR | SW_SPST_Omron_B3FS-105xP | SW305 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS-1095TS-B2C2-D2 SW_MIN | SW_SPST_Omron_B3FS-105xP | SW306 |
| 1 | TS-1095TS-B2C2-D2 SW_PROG | SW_SPST_Omron_B3FS-105xP | SW307 |
| 1 | NTC 10D-11 NTC | Fuse_Littelfuse_395Series | TH201 |
| 1 | PMEG2020EJ,115 2.5A | D_SOD-323F | D201 |
| 1 | XL-2020RGBC-WS2812B WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D301 |
| 1 | HPZ1608D221-1R5TF 220R@100MHz 1.5A | L_0603_1608Metric | FB201 |
| 12 | CC0603KRX7R6BB105 1u 10% 10V | C_0603_1608Metric | C201, C202, C203, C205, C305, C306, C307, C308 +4 |
| 6 | CC0603KRX7R6BB104 100n 10% 10V | C_0603_1608Metric | C204, C301, C303, C304, C401, C403 |
| 2 | MPX334K31D3KN15800 0.33u 275V | C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4 | C206, C207 |
| 1 | CL05A106MP5NUNC 10u 20% 10V X5R | C_0402_1005Metric | C302 |
| 2 | CC0402JRX7R6BB104 100n 10V 5% | C_0402_1005Metric | C312, C313 |
| 2 | CC0603FRNPO9BN220 22p 1% 50V | C_0603_1608Metric | C314, C315 |
| 10 | RT0603BRD0710KL 10K 0.1% | R_0603_1608Metric | R101, R201, R301, R302, R303, R304, R305, R306 +2 |
| 2 | ARG02BTC1001 1K 0.1% | R_0402_1005Metric | R202, R402 |
| 1 | RC0603FR-07100RL 100R | R_0603_1608Metric | R401 |
Digital Timer Switch design files
The KiCad project lives in the sudo-junkie/Digital_Timer_Switch repository on GitHub; these links point at the commit this page was built from.
Digital Timer Switch: common questions
What microcontroller does the Digital Timer Switch use?
The Digital Timer Switch is built around the ATMEGA328P-MUR, from the AVR/Arduino family.
How big is the Digital Timer Switch PCB?
The Digital Timer Switch measures 82.6 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digital Timer Switch?
65 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digital Timer Switch design files?
From the sudo-junkie/Digital_Timer_Switch repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Digital Timer Switch design in my own project?
The repository has no license, so all rights stay with sudo-junkie. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Digital Timer Switch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k