5 open source boards using the ATMEGA328P-MUR
Real designs built with the ATMEGA328P-MUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Driver 40mm atmega v0p4
floesche
40 × 40 mm88 parts4LCC-BY-4.01AVR/Arduino
Digital Timer Switch
sudo-junkie
82.6 × 76.2 mm65 parts2LNo license0AVR/Arduino
Nano original
feastorg
43.2 × 18 mm26 parts2LGPL-3.00AVR/Arduino
Muscleboardv0
gskelly
33.2 × 36.6 mm54 partsNo license21AVR/Arduino
Driver 32mm atmega v0p2
floesche
32 × 32 mm17 partsCC-BY-4.01
The ATMEGA328P-MUR in open source designs
The gallery holds 5 open source boards using the ATMEGA328P-MUR from 4 GitHub repositories; a typical one measures about 40 × 36.6 mm and carries around 54 components.
67% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Muscleboardv0 by gskelly.
Microcontrollers on boards using the ATMEGA328P-MUR
What boards using the ATMEGA328P-MUR are built for
ATMEGA328P-MUR: common questions
Where can I find a ATMEGA328P-MUR reference design?
Each of the 5 boards on this page is a real design using the ATMEGA328P-MUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATMEGA328P-MUR use?
Most are built on AVR/Arduino (5).
How big is a typical board using the ATMEGA328P-MUR?
The median is 40 × 36.6 mm, and 67% are two-layer designs.
What is the most popular open source board using the ATMEGA328P-MUR?
By GitHub stars, Muscleboardv0 by gskelly, with 21 stars.
Can I simulate one of these boards using the ATMEGA328P-MUR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.