H-Bridge-PWM-DC-Motor
sujitkumar05-pcb·H-Bridge-PWM-DC-Motor
About the H-Bridge-PWM-DC-Motor PCB
H-Bridge-PWM-DC-Motor is an open source PCB design by sujitkumar05-pcb, published on GitHub. It is a 2-layer board measuring 67 × 55 mm, with 31 components from 12 distinct parts.
Other key parts include the IR2104. By type, the board carries 10 diodes, 9 capacitors, 4 transistors, 4 resistors, 2 ICs and 2 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
H-Bridge PWM DC Motor PCB Design: A PCB to control the speed and direction of a DC motor. Uses an H-Bridge circuit with PWM input. Can drive the motor forward or reverse. Works with microcontrollers like Arduino. Ideal for basic robotics and motor control projects.
Learn PWM-based speed control techniques for DC motors.
Gain experience in schematic design and basic PCB layout practices.
Understand safe motor driving concepts such as switching logic and power handling.
Develop skills to interface motor drivers with microcontrollers like Arduino or ESP32.
Main components on the H-Bridge-PWM-DC-Motor
H-Bridge-PWM-DC-Motor bill of materials (BOM)
31 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IR2104 | DIP-8_W7.62mm | U1, U2 |
| 4 | IRF3205 | TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 1 | XH-Male Connector | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J1 |
| 1 | KF45 Connector | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2 |
| 6 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D4, D5, D6, D7, D10 |
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D8, D9 |
| 2 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C9 |
| 2 | 1uF | CP_Radial_Tantal_D4.5mm_P5.00mm | C2, C8 |
| 2 | 10uF | CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 1 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C5 |
| 2 | 470nF | C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4 | C6, C7 |
| 4 | 27R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
H-Bridge-PWM-DC-Motor design files
The KiCad project lives in the sujitkumar05-pcb/H-Bridge-PWM-DC-Motor repository on GitHub; these links point at the commit this page was built from.
H-Bridge-PWM-DC-Motor: common questions
How big is the H-Bridge-PWM-DC-Motor PCB?
The H-Bridge-PWM-DC-Motor measures 67 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the H-Bridge-PWM-DC-Motor?
31 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the H-Bridge-PWM-DC-Motor design files?
From the sujitkumar05-pcb/H-Bridge-PWM-DC-Motor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the H-Bridge-PWM-DC-Motor design in my own project?
The repository has no license, so all rights stay with sujitkumar05-pcb. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979