SDM-24 Telemetry Board
About the SDM-24 Telemetry Board
SDM-24 Telemetry Board is an open source NXP PCB design by sundevilmotorsports, published on GitHub. It is a 2-layer board measuring 72 × 74 mm, with 15 components from 15 distinct parts.
Its main chip is the USBLC6-2SC6, from the NXP family. Other key parts include the SN65HVD230. By type, the board carries 4 resistors, 3 ICs, 3 diodes, 2 connectors, 2 capacitors and 1 jumper.
From the project
PCB development repository
Main components on the SDM-24 Telemetry Board
SDM-24 Telemetry Board bill of materials (BOM)
15 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 Teensy4.1 | Teensy41 | U1 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ~ | nrf24L01-click | U3 |
| 1 | CAN | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | CONN_01X04_SOCKET CAN_DaisyChain | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J2 |
| 1 | Bus Termination | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ESDCAN | SOT-323_SC-70 | D1 |
| 1 | RED | LED_1206_3216Metric | D2 |
| 1 | GREEN | LED_1206_3216Metric | D3 |
| 1 | 100NF 100nF | C_0603_1608Metric | C1 |
| 1 | 1UF 100nF | C_0603_1608Metric | C2 |
| 1 | 10K 10k | R_0805_2012Metric | R1 |
| 1 | 10K 120 | R_0603_1608Metric | R2 |
| 1 | 500 | R_0805_2012Metric | R3 |
| 1 | 2.2K 220 | R_0805_2012Metric | R4 |
SDM-24 Telemetry Board design files
The KiCad project lives in the sundevilmotorsports/pcb-dev repository on GitHub; these links point at the commit this page was built from.
SDM-24 Telemetry Board: common questions
What microcontroller does the SDM-24 Telemetry Board use?
The SDM-24 Telemetry Board is built around the USBLC6-2SC6, from the NXP family.
How big is the SDM-24 Telemetry Board?
The SDM-24 Telemetry Board measures 72 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SDM-24 Telemetry Board?
15 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SDM-24 Telemetry Board design files?
From the sundevilmotorsports/pcb-dev repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SDM-24 Telemetry Board design in my own project?
The repository has no license, so all rights stay with sundevilmotorsports. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SDM-24 Telemetry Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in pcb-dev
STM32SDM-24 Data Logger
101 × 75 mm110 parts4LNo license2
ESP32Dash
130 × 81 mm105 parts4LNo license2
ESP32SDM27 StrainGaugeAmp
112.2 × 27.4 mm98 parts2LNo license2
ESP32SDM26 SteeringWheel V1.1
182.9 × 134 mm82 parts4LNo license2
STM32SDM-25 Wheel Board
49 × 41 mm53 parts4LNo license2
BSPD
100 × 43 mm45 parts4LNo license2
STM32SDM25 IMU STM32
32.9 × 46.7 mm39 parts4LNo license2
STM32Telemetry STM32 V3
92 × 52.8 mm37 parts4LNo license2
NXPPedal Load
73.9 × 63.6 mm19 parts2LNo license2
NXPTeensy Telemetry Compact
54 × 54 mm6 parts4LNo license2
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532