HardLabs

Europe ergo smd

Supermagnum·Europe-ergo·Europe-ergo-smd/Europe-ergo-smd.kicad_pcb

Europe ergo smd PCB layout, top view — open source RP2040/RP2350 board by Supermagnum

About the Europe ergo smd PCB

Europe ergo smd is an open source RP2040/RP2350 PCB design by Supermagnum, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 434.6 × 208.2 mm, with 218 components from 10 distinct parts.

Its main chip is the SC0915, from the RP2040/RP2350 family. By type, the board carries 104 diodes, 96 switches, 14 resistors, 2 ICs and 2 connectors.

It belongs with the keyboards designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

A 94 key ergonomic, split keyboard suitable for European countries.

The reset switches, 5 pin D sub connectors and raspberry pico's goes on the reverse side of the Pcb's.

Picture of Pcb's top side: https://github.com/Supermagnum/Europe-ergo/blob/main/Europe-ergo-PCB/Europe-ergo-frontside.jpg

Backside: https://github.com/Supermagnum/Europe-ergo/blob/main/Europe-ergo-PCB/Europe-ergo-backside.jpg

Layout: https://github.com/Supermagnum/Europe-ergo/blob/main/layout.png

Main components on the Europe ergo smd

SC0915

Europe ergo smd bill of materials (BOM)

218 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SC0915
U1, U2
2
SJ-43514
J1, J2
82
MX1A-G1NN
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +74
2
800SP9B6M2RE
SW15, SW16
12
MX1A-G1NN
SW17, SW32, SW33, SW40, SW41, SW48, SW49, SW62 +4
94
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +86
6
LTL-4233
D31, D32, D36, D37, D38, D43
4
LTL-4233
D39, D40, D41, D42
10
330
R1, R2, R3, R4, R5, R6, R7, R8 +2
4
4.7K
R11, R12, R13, R14

Europe ergo smd design files

The KiCad project lives in the Supermagnum/Europe-ergo repository on GitHub; these links point at the commit this page was built from.

Europe ergo smd: common questions

What microcontroller does the Europe ergo smd use?

The Europe ergo smd is built around the SC0915, from the RP2040/RP2350 family.

How big is the Europe ergo smd PCB?

The Europe ergo smd measures 434.6 × 208.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Europe ergo smd?

218 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Europe ergo smd design files?

From the Supermagnum/Europe-ergo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Europe ergo smd design in my own project?

Yes, under the terms of its GPL-3.0 license, which Supermagnum chose for the repository.

Can I test firmware for the Europe ergo smd without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Europe-ergo

Earlier revisions in the repo: europe-ergo-smd

Similar boards