PMW3360
About the PMW3360 PCB
PMW3360 is an open source PCB design by svofski, published on GitHub. It is a 2-layer board measuring 22.8 × 24 mm, with 12 components from 12 distinct parts.
Other key parts include the PMW3360DM-T2QU and TPS73601DBV. By type, the board carries 5 resistors, 4 capacitors, 2 ICs and 1 connector.
From the project
compact cassette data drive
This is a PWM3389 adapter board for use in TAPESHNIK. It is not intended for a general purpose mouse implementation.
The design is based on SideraKB's PMW3360-PCB https://github.com/siderakb/pmw3360-pcb
Main components on the PMW3360
PMW3360 bill of materials (BOM)
12 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PMW3360DM-T2QU | PMW3360DM-T2QU 16Pin | U1 |
| 1 | TPS73601DBV | SOT-23-5 | U2 |
| 1 | Conn_01x07 | EDGE-2.54-7x | J2 |
| 1 | 0.1U 4.7uF/10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 180P 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 2000P 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 150P 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 100K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 39R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 22K 28k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 10K 56.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
PMW3360 design files
The KiCad project lives in the svofski/tapeshnik repository on GitHub; these links point at the commit this page was built from.
PMW3360: common questions
How big is the PMW3360 PCB?
The PMW3360 measures 22.8 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PMW3360?
12 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PMW3360 design files?
From the svofski/tapeshnik repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PMW3360 design in my own project?
The repository has no license, so all rights stay with svofski. Use it as a reference, and ask the author before reusing the design.
