35 open source boards using the PMW3360DM-T2QU
Real designs built with the PMW3360DM-T2QU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
DIY-Gaming-Mouse
wareya
49.8 × 61.7 mm53 parts2LNo license401Untitled
AlaaSaadAbdo
287.8 × 126.7 mm253 parts2LCC-BY-NC-4.018934 monosplit
wj-zhe
243.9 × 109.4 mm81 parts2LNo license25AVR/Arduino
Dynamis
bbrfkr
9.1 × 18.3 mm198 parts2LMIT24PMW3360DM-T2QU
rhssk
23.4 × 28.7 mm13 parts2LMIT22Microchip SAM
Sammy
openinput-fw
25 × 45 mm60 parts4LCERN-OHL-P-2.09RP2040/RP2350
Trackball lt6c
lambdakb
62 × 66.4 mm15 parts2LCERN-OHL-S-2.09Microchip SAM
Big sammy
openinput-fw
25 × 45 mm60 parts4LCERN-OHL-P-2.07RP2040/RP2350
EnvOpenMouse
Envious-Data
34 × 107.6 mm64 parts2LMIT6Trackball lt7dk
lambdakb
62 × 84 mm27 parts2LCERN-OHL-S-2.02AVR/Arduino
DIY Mouse
aSharcc
52 × 99 mm17 parts2LMIT2Pmw3360-optical sensor
wj-zhe
36.1 × 40 mm16 parts2LNo license2AVR/Arduino
Laser keyboard
bbrfkr
336.8 × 109.9 mm177 parts2LNo license1Kevin
seb-ma
208.3 × 104.4 mm84 parts2LMIT1STM32
PMW3360-mouse hardware
ertjy
51 × 82 mm50 parts4LNo license0RP2040/RP2350
CornerCursor
daredllama
102 × 42 mm39 parts2LNo license0Kicad2
ESCO2522
38.7 × 42.8 mm14 parts2LNo license0Nordic nRF
Wrist mouse
iid1
55 × 24.5 mm12 parts2LCERN-OHL-P-2.00Pmw3360 pcb jst
siderakb
27 × 28 mm13 parts2LCERN-OHL-P-2.0194Barghoot
AlaaSaadAbdo
251.3 × 108.7 mm186 parts2LCC-BY-NC-4.0189ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2PMW3360
Andy46
28 × 32 mm13 parts2LNo license0ESP32
Mouse
tyrityri23-lgtm
47.5 × 50 mm12 parts2LNo license0Pmw3360 pcb pinheader
siderakb
23.5 × 33 mm12 parts2LCERN-OHL-P-2.0194Wired wizza
AlaaSaadAbdo
273.8 × 90.9 mm174 parts2LCC-BY-NC-4.0189PMW3360
svofski
22.8 × 24 mm12 parts2LNo license14ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2Sensor
tyrityri23-lgtm
42.1 × 40.8 mm10 parts2LNo license0Scroll wheel trackball
sadekbaroudi
64.8 × 63.5 mm19 parts2LCERN-OHL-P-2.0220Zazu
AlaaSaadAbdo
304.4 × 135 mm167 parts2LCC-BY-NC-4.0189ESP32
Lower
sbarisic
70 × 100 mm92 parts2LCustom license2Pmw3360
sadekbaroudi
25.9 × 41.3 mm14 parts2LCERN-OHL-P-2.0220Wizza-Choc-VIK
AlaaSaadAbdo
214.5 × 80.9 mm80 parts2LCC-BY-NC-4.0189Pmw3360 fsr
wj-zhe
25.6 × 35 mm16 parts2LNo license25Pmw3360 pcb jst
sfunderbots
27 × 28 mm12 parts2LNo license0
How designs wire the PMW3360DM-T2QU
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the PMW3360DM-T2QU connects to, and the resistors, capacitors and other passives placed on it.
- The VDDPIX pin has a capacitor to GND on 24 of 25 designs, most often 4.7 µF (then 100 nF).
- The LED_P pin has a pull-up to VDD on 19 of 24 designs, most often 39 Ω (then 2.2 Ω).
- The VDD pin has a decoupling capacitor on 10 of 24 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 2, 6, 14, 16 | Connected to: Not connected 98% | — |
| VDDPIXpin 3 | Connected to: Signal 84% |
|
| VDDpin 4 | Connected to: VDD 88% |
|
| VDDIOpin 5 | Connected to: 3.3V 63% · a signal 38% |
|
| RESETpin 7 | Connected to: A connector 25% · not connected 33% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| MISOpin 12 | Connected to: The microcontroller 46%, a connector 42% |
|
| LED_Ppin 15 | Connected to: Signal 92% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIY-Gaming-Mouse by wareya, Pmw3360 by sadekbaroudi, Pmw3360 pcb jst by siderakb and Barghoot by AlaaSaadAbdo.
The PMW3360DM-T2QU in open source designs
The gallery holds 35 open source boards using the PMW3360DM-T2QU from 25 GitHub repositories; a typical one measures about 51 × 61.7 mm and carries around 39 components.
86% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is DIY-Gaming-Mouse by wareya.
Parts used alongside the PMW3360DM-T2QU
Microcontrollers on boards using the PMW3360DM-T2QU
What boards using the PMW3360DM-T2QU are built for
PMW3360DM-T2QU: common questions
Where can I find a PMW3360DM-T2QU reference design?
Each of the 35 boards on this page is a real design using the PMW3360DM-T2QU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PMW3360DM-T2QU VDDPIX pin connected?
The VDDPIX pin has a capacitor to GND on 24 of 25 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 25 open source designs using the PMW3360DM-T2QU.
What pull-up resistor is used on the PMW3360DM-T2QU LED_P pin?
The LED_P pin has a pull-up to VDD on 19 of 24 designs, most often 39 Ω (then 2.2 Ω). Counted from the KiCad layouts of 25 open source designs using the PMW3360DM-T2QU.
What decoupling capacitors do designs use on the PMW3360DM-T2QU VDD pin?
The VDD pin has a decoupling capacitor on 10 of 24 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 25 open source designs using the PMW3360DM-T2QU.
What parts are used alongside the PMW3360DM-T2QU?
The AP7331-WG-7, RP2040, TLV74318PDBVR, TPS73601DBV and XC6206P332MR appear in the most repositories here.
Which microcontrollers do boards using the PMW3360DM-T2QU use?
Most are built on ESP32 (4), RP2040/RP2350 (4), AVR/Arduino (3) and Microchip SAM (2).
How big is a typical board using the PMW3360DM-T2QU?
The median is 51 × 61.7 mm, and 86% are two-layer designs.
What is the most popular open source board using the PMW3360DM-T2QU?
By GitHub stars, DIY-Gaming-Mouse by wareya, with 401 stars.
Can I simulate one of these boards using the PMW3360DM-T2QU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.