5 open source boards using the TPS73601DBV

Real designs built with the TPS73601DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS73601DBV

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS73601DBV connects to, and the resistors, capacitors and other passives placed on it.

  • The FB pin has a resistor to GND on 5 of 5 designs, most often 63.4 kΩ (then 56.2 kΩ).
  • The FB pin has a pull-up to VDD_SS on 5 of 5 designs, most often 37.4 kΩ (then 28 kΩ).
  • The OUT pin is tied to VDD_SS on 5 of 5 designs.
  • The FB pin has a capacitor to the supply on 4 of 5 designs, most often 100 nF (then 10 nF).
INpin 1Connected to: 5V 80% · a signal 20%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 5V 60% · a signal 40%
FBpin 4Connected to: Signal 100%
  • Resistor to GND on 100% · 63.4 kΩ (3), 56.2 kΩ (1)
  • Pull-up to VDD_SS on 100% · 37.4 kΩ (3), 28 kΩ (1)
  • Capacitor to the supply on 80% · 100 nF (3), 10 nF (1)
OUTpin 5Connected to: VDD_SS 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dynamis by bbrfkr, PMW3360 by svofski, PixArt-PAW3395-Breakout-Board by vnguyen31 and Masters thesis lora gateway compute module cubesat payload pcb by dpmj.

The TPS73601DBV in open source designs

The gallery holds 5 open source boards using the TPS73601DBV from 5 GitHub repositories; a typical one measures about 30 × 30.2 mm and carries around 177 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Dynamis by bbrfkr.

Parts used alongside the TPS73601DBV

Microcontrollers on boards using the TPS73601DBV

TPS73601DBV: common questions

Where can I find a TPS73601DBV reference design?

Each of the 5 boards on this page is a real design using the TPS73601DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TPS73601DBV FB pin?

The FB pin has a resistor to GND on 5 of 5 designs, most often 63.4 kΩ (then 56.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS73601DBV.

How is the TPS73601DBV OUT pin connected?

The OUT pin is tied to VDD_SS on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS73601DBV.

How is the TPS73601DBV IN pin connected?

The IN pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS73601DBV.

Which microcontrollers do boards using the TPS73601DBV use?

Most are built on AVR/Arduino (2) and Raspberry Pi (1).

How big is a typical board using the TPS73601DBV?

The median is 30 × 30.2 mm, and 80% are two-layer designs.

What is the most popular open source board using the TPS73601DBV?

By GitHub stars, Dynamis by bbrfkr, with 24 stars.

Can I simulate one of these boards using the TPS73601DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part