Usb power

swampwitchpedals·usb-power

Usb power PCB layout, top view — open source board by swampwitchpedals

About the Usb power PCB

Usb power is an open source PCB design by swampwitchpedals, published on GitHub. It is a 2-layer board measuring 37.7 × 15.6 mm, with 7 components from 6 distinct parts.

Other key parts include the LTC660. By type, the board carries 2 connectors, 2 capacitors, 1 IC, 1 diode and 1 resistor.

It belongs with the audio designs in this gallery.

From the project

USB 5v to 9v converter

Have you ever needed to power a guitar pedal at your desk? What about on the go? Maybe you're away from your board and you just want to test something out, but you've got no power bank.

Enter the USB power converter. This USB-A plugin device provides a 9V(ish) power source to a standard DC power jack so that you can power a pedal in any situation.

Usb power, from the project README
From the project README

Main components on the Usb power

LTC660

Usb power bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
LTC660
U3
1
dc_jack
J1
1
USB_A
J2
1
LED
D1
2
10uF
C4, C5
1
4k7
R3

Usb power design files

The KiCad project lives in the swampwitchpedals/usb-power repository on GitHub; these links point at the commit this page was built from.

Usb power: common questions

How big is the Usb power PCB?

The Usb power measures 37.7 × 15.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usb power?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usb power design files?

From the swampwitchpedals/usb-power repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usb power design in my own project?

The repository has no license, so all rights stay with swampwitchpedals. Use it as a reference, and ask the author before reusing the design.

Similar boards