Smart self healing industrial sensor
syedtaqqeeulla0905·smart-self-healing-industrial-sensor·hardware/smart-sensor-node/smart-sensor-node.kicad_sch
About the Smart self healing industrial sensor PCB
Smart self healing industrial sensor is an open source STM32 PCB design by syedtaqqeeulla0905, published on GitHub. It is a board, with 5 components from 4 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the LM35-LP, CD4052B and AMS1117-3.3.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
From the project
Battery-powered embedded sensor node that autonomously detects sensor failures (Stuck-At, Drift, Noise) and self-heals by switching to backup sensors without human intervention. Built with Python simulation, KiCad schematics, PCB design, and C firmware.
Main components on the Smart self healing industrial sensor
Smart self healing industrial sensor bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 2 | LM35-LP | TO-92_Inline | U2, U3 |
| 1 | CD4052B | TO-92_Inline | U4 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
Smart self healing industrial sensor design files
The KiCad project lives in the syedtaqqeeulla0905/smart-self-healing-industrial-sensor repository on GitHub; these links point at the commit this page was built from.
Smart self healing industrial sensor: common questions
What microcontroller does the Smart self healing industrial sensor use?
The Smart self healing industrial sensor is built around the STM32F103C8Tx, from the STM32 family.
How many components are on the Smart self healing industrial sensor?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart self healing industrial sensor design files?
From the syedtaqqeeulla0905/smart-self-healing-industrial-sensor repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Smart self healing industrial sensor design in my own project?
The repository has no license, so all rights stay with syedtaqqeeulla0905. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart self healing industrial sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k