16 open source boards using the CD4052B

Real designs built with the CD4052B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the CD4052B

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the CD4052B connects to, and the resistors, capacitors and other passives placed on it.

  • The VEE pin is tied to GND on 11 of 14 designs (-5V on 3).
  • The VDD pin has a decoupling capacitor on 8 of 14 designs, most often 100 nF (then 2.2 µF).
Y0pin 1Connected to: A connector 21% · not connected 21%
  • Resistor to GND on 36% · 330 kΩ (3), 100 Ω (1)
VEEpin 7Connected to: GND 79% · -5V 21%
VSSpin 8Connected to: GND 93%
X3pin 11Connected to: A connector 21% · not connected 21%
  • Series resistor on 36% · 33 kΩ (2), 6.8 kΩ (1), 100 Ω (1)
Xpin 13Connected to: 4066 21%, LF353 21%
  • Series resistor on 36% · 2.61 kΩ (2), 100 Ω (2), 3.6 kΩ (1)
X1pin 14Connected to: LF347 21%, a connector 21%
  • Capacitor to GND on 36% · 4.7 nF (2), 100 nF (2), 10 nF (1)
  • Series resistor on 36% · 100 Ω (2), 22 Ω (1), 10 kΩ (1)
X2pin 15Connected to: LF347 21%, a connector 21%
  • Capacitor to GND on 36% · 4.7 nF (2), 100 nF (2), 10 nF (1)
  • Series resistor on 36% · 100 Ω (2), 22 Ω (1), 10 kΩ (1)
VDDpin 16Connected to: 3.3V 93%
  • Decoupling capacitor on 57% · 100 nF (8), 2.2 µF (1)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SCOPETREX by schlae, Z2m partner by smarthomefans, Groove pico by whowechina and Micro-Pico Tiny Monosynth by JordanAceto.

The CD4052B in open source designs

The gallery holds 16 open source boards using the CD4052B from 15 GitHub repositories; a typical one measures about 134.6 × 107.9 mm and carries around 120 components.

60% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is SCOPETREX by schlae.

Microcontrollers on boards using the CD4052B

CD4052B: common questions

Where can I find a CD4052B reference design?

Each of the 16 boards on this page is a real design using the CD4052B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CD4052B VEE pin connected?

The VEE pin is tied to GND on 11 of 14 designs (-5V on 3). Counted from the KiCad layouts of 14 open source designs using the CD4052B.

What decoupling capacitors do designs use on the CD4052B VDD pin?

The VDD pin has a decoupling capacitor on 8 of 14 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 14 open source designs using the CD4052B.

What parts are used alongside the CD4052B?

The 4066, 74LS00, 74LS32, AY3-8912 and LF347 appear in the most repositories here.

Which microcontrollers do boards using the CD4052B use?

Most are built on RP2040/RP2350 (2), STM32 (2), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the CD4052B?

The median is 134.6 × 107.9 mm, and 60% are two-layer designs.

What is the most popular open source board using the CD4052B?

By GitHub stars, SCOPETREX by schlae, with 245 stars.

Can I simulate one of these boards using the CD4052B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part