HardLabs

Stm8-smart solar lipo charger

Synthesizer248·stm8-smart-solar-lipo-charger·hardware/kicad/smart_solar_lipo_charger.kicad_pcb

Stm8-smart solar lipo charger PCB layout, top view — open source board by Synthesizer248
Simulate this board

About the Stm8-smart solar lipo charger PCB

Stm8-smart solar lipo charger is an open source PCB design by Synthesizer248, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 40 mm, with 1 components from 1 distinct parts.

It belongs with the power & battery designs in this gallery.

From the project

Smart solar Li-Po charger using STM8S103F3P6 with STM8duino, PWM buck control, and MPPT.

This folder contains starter KiCad source files for the Smart Solar Li-Po charger:

- smartsolarlipocharger.kicadsch - smartsolarlipocharger.kicadpcb

Detailed design intent, net mapping, and placement are documented in:

- ../schematic/smartsolarlipochargerschematic.md - ../schematic/smartsolarlipochargernetlist.csv - ../pcb/smartsolarlipochargerpcb.md - ../pcb/componentplacement.csv`

Stm8-smart solar lipo charger bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
2-PIN
2-pin
J1

Stm8-smart solar lipo charger design files

The KiCad project lives in the Synthesizer248/stm8-smart-solar-lipo-charger repository on GitHub; these links point at the commit this page was built from.

Stm8-smart solar lipo charger: common questions

How big is the Stm8-smart solar lipo charger PCB?

The Stm8-smart solar lipo charger measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm8-smart solar lipo charger?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm8-smart solar lipo charger design files?

From the Synthesizer248/stm8-smart-solar-lipo-charger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm8-smart solar lipo charger design in my own project?

Yes, under the terms of its MIT license, which Synthesizer248 chose for the repository.

Similar boards