T dsp XLR 2x2
t-dsp·t-dsp_XLR_2x2
About the T dsp XLR 2x2 PCB
T dsp XLR 2x2 is an open source PCB design by t-dsp, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 44 × 100 mm, with 14 components from 6 distinct parts.
By type, the board carries 4 capacitors and 2 connectors.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
2-in/2-out XLR breakout for the T-DSP TAC5212 module — 2x XLR-M outputs + 2x XLR-F inputs with combo-jack preamp headers
Part of the T-DSP open modular audio platform.
A simple balanced-audio I/O board: two XLR inputs and two XLR outputs for pro line-level signals. It hosts a T-DSP TAC5212 pro audio module, which handles the entire analog signal path. Audio and control (I2S + I2C) are carried over a ribbon cable to a separate T-DSP controller module — this board has no microcontroller of its own.

T dsp XLR 2x2 bill of materials (BOM)
14 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NC3FAH | Jack_XLR_Neutrik_NC3FAH2_Horizontal | J30, J31 |
| 1 | - Board - | audio_project_board_outline_100x50_nm | B1 |
| 4 | ~jumper jumper - | jumper_slice | G4, G5, G7, G8 |
| 2 | NC3MAH XLRM_NC3MAH Neutrik | XLRM_NC3MAH | XLRM1, XLRM2 |
| 1 | - TAC5212 Module - | audio_module_board_outline_50x34.5_d1 | board_outline1 |
| 4 | 470 uF Electrolytic Audio-Grade | C_Radial_D8.0mm_H11.5mm_P3.50mm | C6, C7, C8, C9 |
T dsp XLR 2x2 design files
The KiCad project lives in the t-dsp/t-dsp_XLR_2x2 repository on GitHub; these links point at the commit this page was built from.
- Layoutt-dsp_XLR_2x2.kicad_pcb
- Schematict-dsp_XLR_2x2.kicad_sch
T dsp XLR 2x2: common questions
How big is the T dsp XLR 2x2 PCB?
The T dsp XLR 2x2 measures 44 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the T dsp XLR 2x2?
14 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the T dsp XLR 2x2 design files?
From the t-dsp/t-dsp_XLR_2x2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the T dsp XLR 2x2 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k