Robot Sumo Bati
TaielST·Robot_Sumo_Bati·Hardware/placa_Bati_V3/placa_Bati_V3.kicad_pcb
About the Robot Sumo Bati PCB
Robot Sumo Bati is an open source ESP32 PCB design by TaielST, published on GitHub. It is a 2-layer board measuring 70 × 50 mm, with 17 components from 13 distinct parts.
Its main chip is the ESP32_DevKit_V1_CH9102X, from the ESP32 family. By type, the board carries 12 connectors, 1 IC, 1 switch and 1 LED.
It belongs with the robotics & motion designs in this gallery.
From the project
El robot Sumo "Bati" está diseñado como un proyecto de robótica para poder competir en la LNR.
Main components on the Robot Sumo Bati
Robot Sumo Bati bill of materials (BOM)
17 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_DevKit_V1_CH9102X | ESP32_DevKit_V1_CH9102X | U1 |
| 1 | BAT + | BORNERA2_AZUL | J1 |
| 1 | BAT - | BORNERA2_AZUL | J2 |
| 2 | DRIVER | pin_strip_4 | J3, J4 |
| 1 | Sharp | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | Buzzer | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | Fuente step down | BORNERA3_AZUL | J7 |
| 2 | Ultrasonido | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8, J9 |
| 2 | CNY70 | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J10, J12 |
| 1 | Switch est | Pin_Header_3 | J11 |
| 2 | Mounting_Hole | Tornillo_M3_8mm | H2, H4 |
| 1 | SW_SPDT | SW_SPDT_TH_Vertical | SW1 |
| 1 | SSD1306-SSD1306-128x64_OLED | 128x64OLED | Display1 |
Robot Sumo Bati design files
The KiCad project lives in the TaielST/Robot_Sumo_Bati repository on GitHub; these links point at the commit this page was built from.
Robot Sumo Bati: common questions
What microcontroller does the Robot Sumo Bati use?
The Robot Sumo Bati is built around the ESP32_DevKit_V1_CH9102X, from the ESP32 family.
How big is the Robot Sumo Bati PCB?
The Robot Sumo Bati measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robot Sumo Bati?
17 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Robot Sumo Bati design files?
From the TaielST/Robot_Sumo_Bati repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Robot Sumo Bati design in my own project?
The repository has no license, so all rights stay with TaielST. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robot Sumo Bati without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k