FSR400 I2C
takahashiryo·FSR400_I2C
About the FSR400 I2C PCB
FSR400 I2C is an open source AVR/Arduino PCB design by takahashiryo, published on GitHub. It is a 2-layer board measuring 10 × 40 mm, with 20 components from 14 distinct parts.
Its main chip is the ATtiny402-SS, from the AVR/Arduino family. Other key parts include the MCP6401T-xOT and NCP163ASN330T1G. By type, the board carries 7 resistors, 5 connectors, 4 capacitors, 3 ICs and 1 diode.
Main components on the FSR400 I2C
FSR400 I2C bill of materials (BOM)
20 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6401T-xOT | SOT-23-5 | U1 |
| 1 | ATtiny402-SS | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | NCP163ASN330T1G | SOT-23-5_HandSoldering | U5 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1, J4 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x01_Socket | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | LED | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 5 | 4.7k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4, R5 |
| 1 | 470 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
FSR400 I2C design files
The KiCad project lives in the takahashiryo/FSR400_I2C repository on GitHub; these links point at the commit this page was built from.
- LayoutFSR400_I2C.kicad_pcb
- SchematicFSR400_I2C.kicad_sch
FSR400 I2C: common questions
What microcontroller does the FSR400 I2C use?
The FSR400 I2C is built around the ATtiny402-SS, from the AVR/Arduino family.
How big is the FSR400 I2C PCB?
The FSR400 I2C measures 10 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FSR400 I2C?
20 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the FSR400 I2C design files?
From the takahashiryo/FSR400_I2C repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FSR400 I2C design in my own project?
The repository has no license, so all rights stay with takahashiryo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FSR400 I2C without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k