16 open source boards using the NCP163ASN330T1G
Real designs built with the NCP163ASN330T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Cdm324 v2
limpkin
32 × 32.5 mm37 parts2LMIT32D1600e psu breakout
antmicro
100 × 100 mm166 parts4LApache-2.020RP2040/RP2350
B-Sides 2024
OklahomaOpenSourceHardware
99.5 × 124.8 mm147 parts2LNo license3Raspberry Pi
Bugg main r5
bugg-resources
57.3 × 109 mm377 parts6LCC-BY-NC-4.01ESP32
Prod pdu
vd-rd
141 × 40 mm95 parts2LNo license0ESP32
Esp32-clover
HarveyBates
29.2 × 46.5 mm65 parts4LGPL-3.00AVR/Arduino
FSR400 I2C
takahashiryo
10 × 40 mm20 parts2LNo license0Mini Orion TEM
Gregification
319.7 × 58.4 mm158 parts2LMIT5ESP32
Controller
SpokeSpice
98.7 × 48.5 mm26 parts4LCERN-OHL-S-2.01ESP32
MiniSpeedCam r1.3
Valar-Systems
50 × 50 mm83 parts4LCERN-OHL-S-2.0112VoltageTap Bee
Gregification
50 × 110.1 mm151 parts2LMIT5ESP32
SparkFun Thing Plus ESP32-S3
Valar-Systems
22.9 × 58.4 mm60 parts4LCERN-OHL-S-2.0112ESP32
SparkFun Thing Plus ESP32-S3 panelized
Valar-Systems
106.6 × 205.2 mm59 parts4LCERN-OHL-S-2.0112STM32
Cdm324 v2
Valar-Systems
32 × 32.5 mm37 parts2LCERN-OHL-S-2.0112CANE Junction
Gregification
60 × 60 mm91 parts2LMIT5CAN Eth Bridge
Gregification
22.6 × 60.7 mm57 parts2LMIT5
How designs wire the NCP163ASN330T1G
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the NCP163ASN330T1G connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 9 of 10 designs, most often 22 µF (then 1 µF).
- The VIN pin has a decoupling capacitor on 7 of 10 designs, most often 22 µF (then 4.7 µF).
- The EN pin is tied to 5V on 8 of 10 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 90% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 80% · a signal 20% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 90% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cdm324 v2 by Valar-Systems, Cdm324 v2 by limpkin, D1600e psu breakout by antmicro and CAN Eth Bridge by Gregification.
The NCP163ASN330T1G in open source designs
The gallery holds 16 open source boards using the NCP163ASN330T1G from 10 GitHub repositories; a typical one measures about 53.6 × 58.4 mm and carries around 74 components.
56% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is MiniSpeedCam r1.3 by Valar-Systems.
Parts used alongside the NCP163ASN330T1G
Microcontrollers on boards using the NCP163ASN330T1G
What boards using the NCP163ASN330T1G are built for
NCP163ASN330T1G: common questions
Where can I find a NCP163ASN330T1G reference design?
Each of the 16 boards on this page is a real design using the NCP163ASN330T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NCP163ASN330T1G VOUT pin?
The VOUT pin has a decoupling capacitor on 9 of 10 designs, most often 22 µF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the NCP163ASN330T1G.
What decoupling capacitors do designs use on the NCP163ASN330T1G VIN pin?
The VIN pin has a decoupling capacitor on 7 of 10 designs, most often 22 µF (then 4.7 µF). Counted from the KiCad layouts of 10 open source designs using the NCP163ASN330T1G.
How is the NCP163ASN330T1G EN pin connected?
The EN pin is tied to 5V on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the NCP163ASN330T1G.
What parts are used alongside the NCP163ASN330T1G?
The LMP7731MF/NOPB, MAX9814ETD+T, PCA8561AHN/AY and STM32F301K8U6 appear in the most repositories here.
Which microcontrollers do boards using the NCP163ASN330T1G use?
Most are built on ESP32 (6), STM32 (2), AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the NCP163ASN330T1G?
The median is 53.6 × 58.4 mm, and 56% are two-layer designs.
What is the most popular open source board using the NCP163ASN330T1G?
By GitHub stars, MiniSpeedCam r1.3 by Valar-Systems, with 112 stars.
Can I simulate one of these boards using the NCP163ASN330T1G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.