21 open source boards using the ATtiny402-SS
Real designs built with the ATtiny402-SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Solar nRF.kicad pro
PocketConcepts
35.9 × 35.5 mm53 parts2LNo license341AVR/Arduino
PCB avr dx unbricker
k-takata
72 × 47.5 mm36 parts2LNo license4AVR/Arduino
3ch pwm sao badge
9a
28 × 15.8 mm18 parts2LNo license3AVR/Arduino
PCB Christmas Tree
KNEAGHUST
100 × 98.6 mm41 parts2LMIT2AVR/Arduino
Watch
tux2603
27.5 × 27.5 mm23 parts2LCC-BY-NC-4.02AVR/Arduino
NightGlow RevA.1
PrinceOfDuloc
160 × 160 mm91 parts2LNo license0AVR/Arduino
PCB updi unbricker
k-takata
54 × 47.5 mm65 parts2LNo license0AVR/Arduino
Vdo breakout
nagutierrez
47 × 48 mm30 parts4LCC-BY-NC-4.00AVR/Arduino
FSR400 I2C
takahashiryo
10 × 40 mm20 parts2LNo license0AVR/Arduino
HW-LEEK-001
diva-eng
73.2 × 96.2 mm20 parts2LMIT0AVR/Arduino
Rcc
0x007E
25.4 × 25.4 mm11 parts2LCC-BY-NC-4.00AVR/Arduino
Saintcon-2026-minibadge
ZeroStack-Labs
25.4 × 25.4 mm7 parts2LMIT0AVR/Arduino
1541-II-low profile rom switcher
jwestfall69
18.4 × 41.5 mm5 parts2LUnlicense0AVR/Arduino
Latest
dennisss
32 × 32 mm89 parts6LApache-2.0381AVR/Arduino
NightGlow RevA
PrinceOfDuloc
160 × 160 mm91 parts2LNo license0ESP8266
ESPTiny402
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04ESP8266
ESPTiny402-hand-SOT89
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04ESP8266
ESPTiny402-SOT89
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04ESP8266
ESPTiny402-SOT89-shove
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04AVR/Arduino
Serial usbc dip-7seg clk
McbeEringi
100 × 100 mm42 parts2LMIT2AVR/Arduino
Jogi
Tert2
100 × 99 mm24 parts2LNo license0
How designs wire the ATtiny402-SS
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the ATtiny402-SS connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 17 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: 3.3V 94% |
|
| PA1pin 4 | Connected to: A connector 29% |
|
| GNDpin 8 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Latest by dennisss, Solar nRF.kicad pro by PocketConcepts, PCB avr dx unbricker by k-takata and ESPTiny402 by tomtor.
The ATtiny402-SS in open source designs
The gallery holds 21 open source boards using the ATtiny402-SS from 17 GitHub repositories; a typical one measures about 32 × 40 mm and carries around 23 components.
90% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is Latest by dennisss.
Microcontrollers on boards using the ATtiny402-SS
What boards using the ATtiny402-SS are built for
ATtiny402-SS: common questions
Where can I find a ATtiny402-SS reference design?
Each of the 21 boards on this page is a real design using the ATtiny402-SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATtiny402-SS VCC pin?
The VCC pin has a decoupling capacitor on 12 of 17 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 17 open source designs using the ATtiny402-SS.
Which microcontrollers do boards using the ATtiny402-SS use?
Most are built on AVR/Arduino (16), ESP8266 (4) and Nordic nRF (1).
How big is a typical board using the ATtiny402-SS?
The median is 32 × 40 mm, and 90% are two-layer designs.
What is the most popular open source board using the ATtiny402-SS?
By GitHub stars, Latest by dennisss, with 381 stars.
Can I simulate one of these boards using the ATtiny402-SS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.