Collect dcdc
takeyamayuki·RCJ_Kanto_Soccer2017_Board
About the Collect dcdc PCB
Collect dcdc is an open source PCB design by takeyamayuki, published on GitHub under the MIT license. It is a 2-layer board measuring 67.5 × 56.5 mm, with 14 components from 11 distinct parts.
Other key parts include the TLP621-1 and up_dcdc30V. By type, the board carries 6 connectors, 3 resistors, 2 ICs, 1 transistor, 1 diode and 1 capacitor.
It belongs with the robotics & motion designs in this gallery.
From the project
Board data of Team NTK that participated in the RoboCup Junior 2017 Kanto Tournament
ロボットの動作状況は以下のYoutube再生リストから確認できます。 https://www.youtube.com/playlist?list=PLkEBRGnKNUILFJv4zKvQkQi69NoT-_FYg
Main components on the Collect dcdc
Collect dcdc bill of materials (BOM)
14 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLP621-1 | TLP621-1 | U25 |
| 1 | up_dcdc30V | DCDC-UP | U26 |
| 1 | IRFB3607 | IRFB3607 | Q17 |
| 1 | CONN_01X08 | Pin_Header_Straight_2x04 | P8 |
| 1 | CONN_01X06 | Pin_Header_Straight_2x03 | P9 |
| 1 | CONN_01X03 | Pin_Header_Straight_1x03 | P10 |
| 3 | CONN_01X02 | JST_B2P-VH(LF)(SN) | P11, P12, P13 |
| 1 | 1N4007 | Diode_DO-41_SOD81_Horizontal_RM10 | D18 |
| 1 | 2200u | C_Radial_D18_L36_P7.5 | C17 |
| 1 | 330 | Resistor_Horizontal_RM7mm | R31 |
| 2 | 1k | Resistor_Horizontal_RM7mm | R32, R33 |
Collect dcdc design files
The KiCad project lives in the takeyamayuki/RCJ_Kanto_Soccer2017_Board repository on GitHub; these links point at the commit this page was built from.
- Layoutcollect dcdc.kicad_pcb
Collect dcdc: common questions
How big is the Collect dcdc PCB?
The Collect dcdc measures 67.5 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Collect dcdc?
14 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Collect dcdc design files?
From the takeyamayuki/RCJ_Kanto_Soccer2017_Board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Collect dcdc design in my own project?
Yes, under the terms of its MIT license, which takeyamayuki chose for the repository.
More boards in RCJ_Kanto_Soccer2017_Board
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979