Antenna Module with integrated receiver
About the Antenna Module with integrated receiver
Antenna Module with integrated receiver is an open source PCB design by takuhoTech, published on GitHub under the MIT license. It is a 4-layer board measuring 80 × 80 mm, with 48 components from 31 distinct parts.
Other key parts include the C0727J5003AHF-1, NJG1155UX2, NT1192FAAE1S, PD0922J5050S2HF and NEO-D9C. By type, the board carries 11 capacitors, 11 resistors, 8 ICs, 6 diodes, 6 inductors and 2 crystals.
It belongs with the rf & radio designs in this gallery.
From the project
Ready-to-use GNSS+CLAS receiver with integrated patch antenna
Main components on the Antenna Module with integrated receiver
Antenna Module with integrated receiver bill of materials (BOM)
48 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C0727J5003AHF-1 | Xinger_0805_2012Metric-6_Pad0.33x0.35mm | U1, U2 |
| 1 | NJG1155UX2 | Nisshinbo_EPFFP-6-FA | U3 |
| 2 | NT1192FAAE1S | Nisshinbo_EPFFP-6-FA | U4, U6 |
| 1 | PD0922J5050S2HF | Xinger_0805_2012Metric-6_Pad0.33x0.41mm | U5 |
| 1 | NEO-D9C | ublox_NEO | U7 |
| 1 | NEO-F9P | ublox_NEO | U8 |
| 1 | TA1985A | Filter_SAW-6_3.0x3.0mm | X1 |
| 1 | TE0133B | Filter_SAW-8_3.0x3.0mm | X2 |
| 1 | Conn_01x10 | PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | GPDF6010.A | Taoglas_GPDF6010.A_GNSS | AE1 |
| 1 | MS421R | Battery_Seiko_MS421R | BT1 |
| 1 | ColdStart | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | CUHS20S30 | D_Toshiba_US2H | D1 |
| 4 | AXGD10402KR | D_Littelfuse_AXGD10402KR_0402_1005Metric_1.02x0.51mm | D2, D3, D4, D5 |
| 1 | PULSE | LED_0402_1005Metric | D6 |
| 1 | 12nH | L_Murata_LQW15ANxxxx80x_0402_1005Metric_1.0x0.6mm | L1 |
| 2 | 20nH | L_Murata_LQW15ANxxxx80x_0402_1005Metric_1.0x0.6mm | L2, L6 |
| 1 | 3.3nH | L_Murata_LQW15ANxxxx80x_0402_1005Metric_1.0x0.6mm | L3 |
| 1 | 5.6nH | L_Murata_LQW15ANxxxx80x_0402_1005Metric_1.0x0.6mm | L4 |
| 1 | 3.6nH | L_Murata_LQW15ANxxxx80x_0402_1005Metric_1.0x0.6mm | L5 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7p | C_Murata_xxx15_0402_1005Metric_1.0x0.5mm | C1, C2 |
| 3 | 1000p | C_Murata_xxx15_0402_1005Metric_1.0x0.5mm | C3, C4, C6 |
| 1 | 2.4p | C_Murata_xxx15_0402_1005Metric_1.0x0.5mm | C5 |
| 2 | 1p | C_Murata_xxx15_0402_1005Metric_1.0x0.5mm | C7, C8 |
| 2 | 1u | C_0603_1608Metric | C9, C11 |
| 1 | 2.2u | C_0603_1608Metric | C10 |
| 2 | 50 | R_0402_1005Metric | R1, R2 |
| 1 | 100 | R_Vishay_FC0603xxxxxxTxx_0603_1608Metric_1.626x0.813mm | R3 |
| 6 | 33 | R_0402_1005Metric | R4, R5, R6, R7, R9, R10 |
| 1 | 3.3k | R_0402_1005Metric | R8 |
| 1 | 1k | R_0402_1005Metric | R11 |
Antenna Module with integrated receiver design files
The KiCad project lives in the takuhoTech/CelestNavi-Fusion repository on GitHub; these links point at the commit this page was built from.
Antenna Module with integrated receiver: common questions
How big is the Antenna Module with integrated receiver?
The Antenna Module with integrated receiver measures 80 × 80 mm, has 4 copper layers and is 1.6252 mm thick.
How many components are on the Antenna Module with integrated receiver?
48 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Antenna Module with integrated receiver design files?
From the takuhoTech/CelestNavi-Fusion repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Antenna Module with integrated receiver design in my own project?
Yes, under the terms of its MIT license, which takuhoTech chose for the repository.
More boards in CelestNavi-Fusion
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568