Stasis fraud
Taran-the-Idiot·stasis-fraud
About the Stasis fraud PCB
Stasis fraud is an open source RP2040/RP2350 PCB design by Taran-the-Idiot, published on GitHub. It is a 2-layer board measuring 42.9 × 62.9 mm, with 7 components from 3 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 2 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
THIS IS A COPIED PROJECT TO TEST FRAUD TOOLING
This is a Macropad to make my coding/dev flow easier.
I added keys to: - launch wsl - git commit - save files - comment out lines
Main components on the Stasis fraud
Stasis fraud bill of materials (BOM)
7 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 2 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2 |
Stasis fraud design files
The KiCad project lives in the Taran-the-Idiot/stasis-fraud repository on GitHub; these links point at the commit this page was built from.
- Layoutmacropad.kicad_pcb
- Schematicmacropad.kicad_sch
- BOMIshan's Macropad BOM.csv
Stasis fraud: common questions
What microcontroller does the Stasis fraud use?
The Stasis fraud is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Stasis fraud PCB?
The Stasis fraud measures 42.9 × 62.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stasis fraud?
7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stasis fraud design files?
From the Taran-the-Idiot/stasis-fraud repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stasis fraud design in my own project?
The repository has no license, so all rights stay with Taran-the-Idiot. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stasis fraud without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k