Data
tbusari·Data·hardware/pcb/pcm_encryptor.kicad_pcb
About the Data PCB
Data is an open source FPGA PCB design by tbusari, published on GitHub. It is a 4-layer board measuring 80 × 50 mm, with 1 components from 1 distinct parts.
Its main chip is the ICE40UP5K-SG48ITR, from the FPGA family.
From the project
Design-as-code for the device the revised paper proposes between the KAM-500 BCU/101 PCM encoder and the Quasonix nanoTX. Everything is text, generated by Python, and verified against the pcmsec reference implementation that the paper's simulations use.
Design-as-code for the device the revised paper proposes between the KAM-500 BCU/101 PCM encoder and the Quasonix nanoTX. Everything is text, generated by Python, and verified against the pcmsec reference implementation that the paper's simulations use.
- asconcore: ciphertext and tag bit-exact against pcmsec.ascon (itself verified against the 1089 official NIST/ascon-c known-answer vectors) for payloads of 1 to 95 words. - encryptor (word level): every output word of three consecutive frames bit-exact against pcmsec.secure.Encryptor. - encryptor (serial, 70 frames, random preamble, 8 system…
Main components on the Data
Data bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40UP5K-SG48ITR | U1 |
Data design files
The KiCad project lives in the tbusari/Data repository on GitHub; these links point at the commit this page was built from.
Data: common questions
What microcontroller does the Data use?
The Data is built around the ICE40UP5K-SG48ITR, from the FPGA family.
How big is the Data PCB?
The Data measures 80 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Data?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Data design files?
From the tbusari/Data repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Data design in my own project?
The repository has no license, so all rights stay with tbusari. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Data without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765