40 open source boards using the ICE40UP5K-SG48ITR
Real designs built with the ICE40UP5K-SG48ITR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Arctyx-Nano
Keyaan-07
51 × 21 mm63 parts4LMIT124ESP32
MIG Dumper
sabogalc
60 × 33 mm71 parts4LWTFPL64FPGA
Hackrf pro
greatscottgadgets
120 × 75 mm503 parts6LCERN-OHL-P-2.063FPGA
HUB75E ICE40
riktw
50 × 37.3 mm51 parts2LGPL-3.033FPGA
TsuraraGB Main
rniwase
51 × 61 mm67 parts2LBSD-3-Clause16FPGA
Keep breathing ctrl
CV19CO
153 × 148 mm248 parts4LCERN-OHL-P-2.05FPGA
Mta1 usb dev
tillitis
91.4 × 40.6 mm83 parts4LCERN-OHL-S-2.03RP2040/RP2350
Chipignite discover
efabless
53.5 × 65.5 mm139 parts4LApache-2.02STM32
ICEBrainstorm
jdekanter077
80 × 70 mm103 parts4LGPL-3.02FPGA
ICEBreaker Bitsy
murkyshelf
35.6 × 17.8 mm82 parts4LApache-2.02STM32
Mattie
svenssonjoel
55 × 32 mm55 parts4LGPL-3.02ESP32
Benchpod
embeddedci-com
82 × 90 mm306 parts4LCERN-OHL-W-2.01FPGA
NorthernStudios iCE40-UltraPlus-FPGA-Dev-Board
uzzambutt
27 × 55.5 mm62 parts4LMIT1RP2040/RP2350
MDFPGA
aslak3
99.1 × 73.7 mm54 parts4LGPL-2.01FPGA
ICE40UP5K to PCM5102A, I2S out
sabas0ba
100 × 84 mm33 parts2LApache-2.01FPGA
ProgrammaGull Sandpiper
4n3m4i1
100 × 75 mm213 parts4LMIT0ESP32
VERA MODULE A2
gianlucarenzi
177.8 × 77.3 mm181 parts2LGPL-3.00ESP32
Vera-Module-RBL-XE
gianlucarenzi
143 × 162.5 mm175 parts2LGPL-3.00ESP32
Vera-Module-RBL-C64
gianlucarenzi
143 × 162.5 mm175 parts2LGPL-3.00STM32
STM32H743
sneakylizard123-4
100 × 75 mm162 parts6LCERN-OHL-P-2.00FPGA
Eurorack-DIGI
cookiemonsternz
40 × 100 mm127 parts6LNo license0ESP32
Mstd
xvrxvr
96 × 96.3 mm88 parts4LMIT0FPGA
CERBERUS
Darkops-cpu
87.3 × 40.5 mm85 parts4LNo license0FPGA
FPGA Board
sneakylizard123-4
50 × 70 mm81 parts4LNo license0FPGA
Ice40 wearable v1
asinghani
51.2 × 51.2 mm61 parts2LNo license0ESP32
FPGABoard
TTF-fog
36.7 × 56.3 mm52 parts4LNo license0FPGA
ICE40UP5Kdev
mbelanger0
25.4 × 52.4 mm51 parts2LNo license0FPGA
Pcb dev fpga iCE40
shishir-dey
75.3 × 43.3 mm50 parts2LMIT0FPGA
PCB Voltera
Michaelf09
83 × 58 mm46 parts2LNo license0FPGA
Tk1
kr-Eliza
83 × 58 mm44 parts2LCERN-OHL-S-2.00FPGA
Meetnote
anweat
70 × 70 mm31 parts4LMIT0FPGA
Data
tbusari
80 × 50 mm1 parts4LNo license0- schematic only · 49 partsFPGA
Gate to glass
OoEthanoO
49 partsNo license0 ESP32
MIG Flashcart
sabogalc
27.4 × 17 mm36 parts4LWTFPL64FPGA
Mta1-usb v1
tillitis
28.4 × 13.5 mm47 parts4LCERN-OHL-S-2.03FPGA
Muon telescope
muonTelescope
108 × 86 mm107 parts4LCERN-OHL-S-2.01
How designs wire the ICE40UP5K-SG48ITR
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the ICE40UP5K-SG48ITR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pins have a decoupling capacitor on 27 of 32 designs, most often 1 µF (then 100 nF).
- The VCCIO_0 pin has a decoupling capacitor on 25 of 31 designs, most often 100 nF (then 1 µF).
- The VCCIO_2 pin has a decoupling capacitor on 24 of 32 designs, most often 1 µF (then 100 nF).
- The SPI_VCCIO1 pin has a decoupling capacitor on 23 of 31 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCIO_2pin 1 | Connected to: 3.3V 88% |
|
| VCCpin 5, 30 | Connected to: 1.2V 90% |
|
| CDONEpin 7 | Connected to: The microcontroller 35%, a connector 26% |
|
| CRESETpin 8 | Connected to: A connector 45%, the microcontroller 35% |
|
| IOB_34A_SPI_SCKpin 15 | Connected to: A connector 45% |
|
| IOB_35B_SPI_SSpin 16 | Connected to: A connector 45%, the microcontroller 23% |
|
| SPI_VCCIO1pin 22 | Connected to: 3.3V 87% |
|
| VPP_2V5pin 24 | Connected to: 2.5V 71% · a signal 29% |
|
| VCCPLLpin 29 | Connected to: 1.2V 52% · a signal 48% |
|
| VCCIO_0pin 33 | Connected to: 3.3V 84% · a signal 16% |
|
| GNDpin 49 | Connected to: GND 100% | — |
37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Arctyx-Nano by Keyaan-07, MIG Dumper by sabogalc, Hackrf pro by greatscottgadgets and HUB75E ICE40 by riktw.
The ICE40UP5K-SG48ITR in open source designs
The gallery holds 40 open source boards using the ICE40UP5K-SG48ITR from 34 GitHub repositories; a typical one measures about 72.7 × 58 mm and carries around 63 components.
69% use four copper layers or more, and 75% carry an open source license.
The most starred is Arctyx-Nano by Keyaan-07.
Parts used alongside the ICE40UP5K-SG48ITR
Microcontrollers on boards using the ICE40UP5K-SG48ITR
What boards using the ICE40UP5K-SG48ITR are built for
ICE40UP5K-SG48ITR: common questions
Where can I find a ICE40UP5K-SG48ITR reference design?
Each of the 40 boards on this page is a real design using the ICE40UP5K-SG48ITR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICE40UP5K-SG48ITR VCC pin?
The VCC pins have a decoupling capacitor on 27 of 32 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 32 open source designs using the ICE40UP5K-SG48ITR.
What decoupling capacitors do designs use on the ICE40UP5K-SG48ITR VCCIO_0 pin?
The VCCIO_0 pin has a decoupling capacitor on 25 of 31 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the ICE40UP5K-SG48ITR.
What decoupling capacitors do designs use on the ICE40UP5K-SG48ITR VCCIO_2 pin?
The VCCIO_2 pin has a decoupling capacitor on 24 of 32 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 32 open source designs using the ICE40UP5K-SG48ITR.
What parts are used alongside the ICE40UP5K-SG48ITR?
The AMS1117-3.3, USBLC6-2SC6, AMS1117-1.2, 74LVC4245APW_118 and CD4011B appear in the most repositories here.
Which microcontrollers do boards using the ICE40UP5K-SG48ITR use?
Most are built on FPGA (26), ESP32 (8), RP2040/RP2350 (3) and STM32 (3).
How big is a typical board using the ICE40UP5K-SG48ITR?
The median is 72.7 × 58 mm, and 31% are two-layer designs.
What is the most popular open source board using the ICE40UP5K-SG48ITR?
By GitHub stars, Arctyx-Nano by Keyaan-07, with 124 stars.
Can I simulate one of these boards using the ICE40UP5K-SG48ITR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.