Rambo jig

teaguecl·nes_tengen_rambo1_research·hardware/jig_board/rambo_jig.kicad_pcb

Rambo jig PCB layout, top view — open source board by teaguecl

About the Rambo jig PCB

Rambo jig is an open source PCB design by teaguecl, published on GitHub under the MIT license. It is a 4-layer board measuring 120 × 109 mm, with 25 components from 15 distinct parts.

Other key parts include the RAMBO-1 (Tengen 337006), SST39SF040 (PRG), SST39SF040 (CHR) and 74HC04 (optional, DNP). By type, the board carries 11 resistors, 5 capacitors, 4 ICs, 3 connectors and 2 switches.

It belongs with the retro computing designs in this gallery.

From the project

Reverse engineering of the Tengen RAMBO-1 (337006, iNES mapper 64): findings, emulator guide, FPGA notes, hardware-verified test ROMs, jig and adapter designs

KiCad projects for the boards used to characterise the RAMBO-1.

Each board folder has the KiCad project (.kicadpro, .kicadsch, .kicadpcb), its symbol library, the nescart.pretty footprints.

- The designs were built and used. The RP2350 adapter board was checked against the pin map (all 33 signals match) and is documented in ../docs/rp2350adapterplan.md and ../docs/rp2350bringup.md. - Loopback calibration of the adapter's edge timing has not been done (it needs jumper wires). Treat adapter timings of a few ns as uncertain. - The Olimex module is third-party…

Main components on the Rambo jig

RAMBO-1 (Tengen 337006)SST39SF040 (PRG)SST39SF040 (CHR)74HC04 (optional, DNP)

Rambo jig bill of materials (BOM)

25 components, 15 distinct parts.

QtyPartRefs
1
RAMBO-1 (Tengen 337006)
U1
1
SST39SF040 (PRG)
U2
1
SST39SF040 (CHR)
U3
1
74HC04 (optional, DNP)
U4
1
NES 72-pin edge
J1
1
On Shore 302-S401
J2
1
1x6 header
J3
1
CTS 206-3ST
SW1
1
SPDT slide (e.g. C&K OS102011MS2QN1)
SW2
4
100nF
C1, C2, C3, C4
1
10uF
C6
6
10k
R1, R2, R3, R4, R5, R6
1
1k bussed x8 (4609X-101-102)
R8
3
220R isolated x8
RN1, RN2, RN3
1
10k bussed x9
RN4

Rambo jig design files

The KiCad project lives in the teaguecl/nes_tengen_rambo1_research repository on GitHub; these links point at the commit this page was built from.

Rambo jig: common questions

How big is the Rambo jig PCB?

The Rambo jig measures 120 × 109 mm, has 4 copper layers and is 1.2 mm thick.

How many components are on the Rambo jig?

25 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rambo jig design files?

From the teaguecl/nes_tengen_rambo1_research repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rambo jig design in my own project?

Yes, under the terms of its MIT license, which teaguecl chose for the repository.

More boards in nes_tengen_rambo1_research

Similar boards