CoRE2025MainBoard 1

team-continue·core2025_boards·KiCadProject/CoRE2025MainBoard_1/CoRE2025MainBoard_1.kicad_pcb

CoRE2025MainBoard 1 PCB layout, top view — open source NXP board by team-continue

About the CoRE2025MainBoard 1 PCB

CoRE2025MainBoard 1 is an open source NXP PCB design by team-continue, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 56 components from 33 distinct parts.

Its main chip is the Teensy4.1, from the NXP family. Other key parts include the cc6_xxxxxF-E, DCL541A01, ISO1044BD, MAX485E and MPD7K020S. By type, the board carries 16 connectors, 13 capacitors, 11 resistors, 7 ICs, 3 switches and 3 diodes.

Main components on the CoRE2025MainBoard 1

Teensy4.1cc6_xxxxxF-EDCL541A01ISO1044BDMAX485EMPD7K020S

CoRE2025MainBoard 1 bill of materials (BOM)

56 components, 33 distinct parts.

QtyPartRefs
1
Teensy4.1
U1
1
cc6_xxxxxF-E
U2
1
DCL541A01
U3
2
ISO1044BD
U4, U5
1
MAX485E
U6
1
MPD7K020S
U7
1
INKA114AS1
Q1
1
2SA1015
Q2
1
ICM-20948
J1
1
I2C
J2
1
LvConv
J3
1
EmergencySW
J4
1
Emergency
J5
2
UART
J6, J7
1
XT60M
J8
1
XH
J9
1
VH
J10
2
RJ45
J11, J12
2
XH
J13, J16
2
PH
J14, J15
Show 13 more
QtyPartRefs
1
5A
F1
1
SW1
SW1
2
SW_SPST
SW2, SW3
3
Green
D1, D2, D3
8
0.1u
C1, C2, C3, C4, C5, C6, C7, C11
2
10u
C8, C9
3
1000u/35V
C10, C12, C13
1
NC
R1
1
7.5k
R2
4
10k
R3, R4, R9, R11
2
120
R5, R8
2
2.2k
R6, R7
1
1k
R10

CoRE2025MainBoard 1 design files

The KiCad project lives in the team-continue/core2025_boards repository on GitHub; these links point at the commit this page was built from.

CoRE2025MainBoard 1: common questions

What microcontroller does the CoRE2025MainBoard 1 use?

The CoRE2025MainBoard 1 is built around the Teensy4.1, from the NXP family.

How big is the CoRE2025MainBoard 1 PCB?

The CoRE2025MainBoard 1 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CoRE2025MainBoard 1?

56 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the CoRE2025MainBoard 1 design files?

From the team-continue/core2025_boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CoRE2025MainBoard 1 design in my own project?

The repository has no license, so all rights stay with team-continue. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CoRE2025MainBoard 1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in core2025_boards

Similar boards