Customkeyboard

tech-support03·customkeyboard·pcb/keyboard.kicad_pcb

Customkeyboard PCB layout, top view — open source RP2040/RP2350 board by tech-support03

About the Customkeyboard PCB

Customkeyboard is an open source RP2040/RP2350 PCB design by tech-support03, published on GitHub. It is a 2-layer board measuring 356.5 × 123.6 mm, with 132 components from 11 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 66 switches, 65 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

custom keyboard design blueprint project

The purpose of this project was to learn about designing pcbs and how to make my own keyboard. I wanted to make something that was not a completely unique design but I wanted my own personal touch. It had to be small and portable, so I went with a 60% layout at first. However I really wanted arrow keys because they are very important to me in a keyboard layout, so I added them and it acutally led to better packaging overall. Another very important thing to me was hotswapability. I wanted the ability to change my switches if I wanted to. This led to its own set of challenges, but eventually it…

Customkeyboard, from the project README
From the project README

Main components on the Customkeyboard

Customkeyboard bill of materials (BOM)

132 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
50
SW_PUSH_45DEG
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +42
1
SW_PUSH_45DEG
SW_Push_45deg
SW14
2
SW_PUSH_45DEG
SW_Push_45deg
SW15, SW28
1
SW_PUSH_45DEG
SW_Push_45deg
SW29
2
SW_PUSH_45DEG
SW_Push_45deg
SW41, SW42
1
SW_PUSH_45DEG
SW_Push_45deg
SW53
7
SW_PUSH_45DEG
SW_Push_45deg
SW54, SW55, SW56, SW58, SW59, SW60, SW61
1
SW_PUSH_45DEG
SW_Push_45deg
SW57
1
RotaryEncoder_Switch
SW77
65
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +57

Customkeyboard design files

The KiCad project lives in the tech-support03/customkeyboard repository on GitHub; these links point at the commit this page was built from.

Customkeyboard: common questions

What microcontroller does the Customkeyboard use?

The Customkeyboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Customkeyboard PCB?

The Customkeyboard measures 356.5 × 123.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Customkeyboard?

132 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Customkeyboard design files?

From the tech-support03/customkeyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Customkeyboard design in my own project?

The repository has no license, so all rights stay with tech-support03. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Customkeyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards