Salt Booklamp
tedfernau·SaltGlow·pcb/salt_booklamp.kicad_pcb
About the Salt Booklamp PCB
Salt Booklamp is an open source PIC PCB design by tedfernau, published on GitHub. It is a 4-layer board measuring 45.1 × 45.1 mm, with 23 components from 13 distinct parts.
Its main chip is the PIC16F15213T-I/MF, from the PIC family. Other key parts include the BQ21040DBVR and TPS61158DRVR. By type, the board carries 8 resistors, 5 capacitors, 3 ICs, 3 LEDs, 1 connector and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
A portable saltlamp for camping, reading, or just setting the mood.
A portable saltlamp for camping, reading, or just setting the mood.
Simple materials for modern living: Salt, Copper, Wood.
Features: \ -USBC rechargable in less than 2 hours (100 minutes) (dumb charger only)\ -11 hour battery life - Max Brightness\ -about 5.5 days battery life - Low Brightness\ -3 Brightness Settings\ -Simple Materials\ -Each Lamp is Unique\ -Hand Assembled and Salt Selected\ -Designed in USA\ -Small Batch\

Main components on the Salt Booklamp
Salt Booklamp bill of materials (BOM)
23 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F15213T-I/MF | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U1 |
| 1 | BQ21040DBVR | BQ21040DBVR | U2 |
| 1 | TPS61158DRVR | 6-WDFN - TPS61158DRVR | U3 |
| 1 | USB-C31-S-RA-CS1E-BK-T/R | USB-C31-S-RA-CS1E-BK | J1 |
| 1 | S2B-PH-K-S | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BATT1 |
| 1 | CL-SB-12C-12 | CL-SB-12C-11 | S1 |
| 3 | SMS1105UWDW Bivar Inc. | LED_SMS1105UWDW | LED1, LED2, LED3 |
| 1 | VLS3012CX-220M-1 22uH | ind_VLS3012CX | L1 |
| 5 | EMK105BJ105KV-F 1uF | C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 4 | RC0402JR-0710KL 10k0 | R_0402_1005Metric | R1, R3, R4, R5 |
| 1 | CRCW04026R80FKED 6r8 | R_0402_1005Metric | R2 |
| 1 | CR0603-FX-1201ELF 1k2 | R_0402_1005Metric | R6 |
| 2 | ERA-2AEB512X 5k1 | R_0402_1005Metric | R9, R10 |
Salt Booklamp design files
The KiCad project lives in the tedfernau/SaltGlow repository on GitHub; these links point at the commit this page was built from.
Salt Booklamp: common questions
What microcontroller does the Salt Booklamp use?
The Salt Booklamp is built around the PIC16F15213T-I/MF, from the PIC family.
How big is the Salt Booklamp PCB?
The Salt Booklamp measures 45.1 × 45.1 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Salt Booklamp?
23 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Salt Booklamp design files?
From the tedfernau/SaltGlow repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Salt Booklamp design in my own project?
The repository has no license, so all rights stay with tedfernau. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Salt Booklamp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379