LineSensor Block prot1
About the LineSensor Block prot1 PCB
LineSensor Block prot1 is an open source PCB design by Tellurnoid, published on GitHub. It is a 2-layer board measuring 140 × 140 mm, with 69 components from 11 distinct parts.
Other key parts include the LM393. By type, the board carries 24 resistors, 14 capacitors, 12 transistors, 12 diodes, 4 connectors and 3 ICs.
From the project
2025年度 ロボカップジュニアライトウェイトサッカー競技に出場する、埼玉県立浦和高校物理部のチーム「URAWA BOLSAE(ボルセ)」の機体に関わる情報です。
Main components on the LineSensor Block prot1
LineSensor Block prot1 bill of materials (BOM)
69 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | LM393 ~ | TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | LM393 ~ | 名称未設定 | U4 |
| 12 | Q_Photo_NPN | LED_0603_1608Metric | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +4 |
| 1 | CONN_01X04_SOCKET Conn_01x07_Socket | PinHeader_1x07_P2.54mm_Horizontal_edited | J1 |
| 1 | CONN_01X02_SOCKET Conn_01x07_Socket | PinHeader_1x07_P2.54mm_Horizontal_edited | J2 |
| 2 | Conn_01x07_Socket | PinSocket_1x07_P2.54mm_Horizontal_edited | J3, J4 |
| 12 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 13 | C | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C8, C9 +5 |
| 1 | C | R_0603_1608Metric | C7 |
| 24 | R | R_0603_1608Metric | R1, R1d1, R2, R2d1, R3, R3d1, R4, R4d1 +16 |
LineSensor Block prot1 design files
The KiCad project lives in the Tellurnoid/25RoboCup repository on GitHub; these links point at the commit this page was built from.
LineSensor Block prot1: common questions
How big is the LineSensor Block prot1 PCB?
The LineSensor Block prot1 measures 140 × 140 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LineSensor Block prot1?
69 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LineSensor Block prot1 design files?
From the Tellurnoid/25RoboCup repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LineSensor Block prot1 design in my own project?
The repository has no license, so all rights stay with Tellurnoid. Use it as a reference, and ask the author before reusing the design.
More boards in 25RoboCup
AVR/ArduinoLineSensor
389.4 × 319.7 mm145 parts2LNo license1
Linesensor Japan prot2
139.9 × 140 mm141 parts2LNo license1
Linesensor Japan prot1
140 × 140 mm140 parts2LNo license1
ESP32IR Japan prot2
100 × 100 mm66 parts2LNo license1
ESP32IR Japan prot3
100 × 100 mm65 parts2LNo license1
ESP32IR Japan prot1
100 × 100 mm65 parts2LNo license1
ESP32メインの穴付き
100 × 100 mm59 parts2LNo license1
Raspberry PiMain RCJ Japan prot2 with kickBoard
99.5 × 94.9 mm25 parts2LNo license1
Raspberry PiMain RCJ Japan prot2
99.5 × 94.9 mm25 parts2LNo license1
RCJ Power
57.1 × 58.3 mm20 parts2LNo license1