HardLabs

Main RCJ Japan prot2

Tellurnoid·25RoboCup·KiCad/Main_RCJ_Japan_prot2/Main_RCJ_Japan_prot2.kicad_pcb

Main RCJ Japan prot2 PCB layout, top view — open source Raspberry Pi board by Tellurnoid

About the Main RCJ Japan prot2 PCB

Main RCJ Japan prot2 is an open source Raspberry Pi PCB design by Tellurnoid, published on GitHub. It is a 2-layer board measuring 99.5 × 94.9 mm, with 25 components from 15 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. By type, the board carries 14 connectors, 3 capacitors, 2 ICs, 2 resistors, 1 module and 1 buzzer.

From the project

2025年度 ロボカップジュニアライトウェイトサッカー競技に出場する、埼玉県立浦和高校物理部のチーム「URAWA BOLSAE(ボルセ)」の機体に関わる情報です。

Main components on the Main RCJ Japan prot2

RaspberryPi_Pico_W

Main RCJ Japan prot2 bill of materials (BOM)

25 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
~
U1, U2
1
RaspberryPi_Pico_W
A1
2
CONN_01X04_SOCKET
Conn_01x04_Socket
J1, J2
4
CONN_01X04_SOCKET
Conn_01x04_Socket
J3, J4, J5, J6
2
CONN_01X02_SOCKET
Conn_01x02_Socket
J7, J10
1
CONN_01X06_SOCKET
Conn_01x06_Socket
J8
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J9
2
CONN_01X03_SOCKET
Conn_01x03_Socket
J11, J12
2
CONN_01X02_SOCKET
Conn_01x02_Socket
J13, J14
1
Buzzer
BZ1
1
SW_Push
SW1
1
D_Schottky
D2
2
C
C1, C3
1
C_Polarized_US
C2
2
R
R1, R2

Main RCJ Japan prot2 design files

The KiCad project lives in the Tellurnoid/25RoboCup repository on GitHub; these links point at the commit this page was built from.

Main RCJ Japan prot2: common questions

What microcontroller does the Main RCJ Japan prot2 use?

The Main RCJ Japan prot2 is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Main RCJ Japan prot2 PCB?

The Main RCJ Japan prot2 measures 99.5 × 94.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main RCJ Japan prot2?

25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Main RCJ Japan prot2 design files?

From the Tellurnoid/25RoboCup repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Main RCJ Japan prot2 design in my own project?

The repository has no license, so all rights stay with Tellurnoid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main RCJ Japan prot2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in 25RoboCup

Similar boards