HardLabs

メインの穴付き

Tellurnoid·25RoboCup·KiCad/IR_Japan_prot3/メインの穴付き.kicad_pcb

メインの穴付き PCB layout, top view — open source ESP32 board by Tellurnoid

About the メインの穴付き PCB

メインの穴付き is an open source ESP32 PCB design by Tellurnoid, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 59 components from 10 distinct parts.

Its main chip is the ESP32_devModule, from the ESP32 family. Other key parts include the TSSP58038 and LM393. By type, the board carries 17 ICs, 16 capacitors, 16 resistors, 9 connectors and 1 switch.

From the project

2025年度 ロボカップジュニアライトウェイトサッカー競技に出場する、埼玉県立浦和高校物理部のチーム「URAWA BOLSAE(ボルセ)」の機体に関わる情報です。

Main components on the メインの穴付き

TSSP58038LM393

メインの穴付き bill of materials (BOM)

59 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
8
TSSP58038
U1, U10, U11, U12, U13, U14, U15, U16
8
LM393
TSSP58038
U2, U3, U4, U5, U6, U7, U8, U9
1
~
U17
1
CONN_01X04_SOCKET
Conn_01x09_Socket
J1
1
CONN_01X02_SOCKET
Conn_01x03_Socket
J2
4
Conn_01x03_Socket
J3, J4, J5, J9
3
Conn_01x04_Socket
J6, J7, J8
1
SW_DPST_x2
SW1
16
C
C1, C2, C3, C4, C5, C6, C7, C8 +8
16
R
R1, R2, R3, R4, R5, R6, R7, R8 +8

メインの穴付き design files

The KiCad project lives in the Tellurnoid/25RoboCup repository on GitHub; these links point at the commit this page was built from.

メインの穴付き: common questions

What microcontroller does the メインの穴付き use?

The メインの穴付き is built around the ESP32_devModule, from the ESP32 family.

How big is the メインの穴付き PCB?

The メインの穴付き measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the メインの穴付き?

59 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the メインの穴付き design files?

From the Tellurnoid/25RoboCup repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the メインの穴付き design in my own project?

The repository has no license, so all rights stay with Tellurnoid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the メインの穴付き without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in 25RoboCup

Similar boards