Soldered-4CH-relay board easyC-hardware design
test-gh-syncer2·Soldered-4CH-relay-board-easyC-hardware-design·CAD/V1.0/4CH_relay_board_easyC.kicad_pcb
About the Soldered-4CH-relay board easyC-hardware design
Soldered-4CH-relay board easyC-hardware design is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 70 × 54 mm, with 60 components from 21 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the PC357_OPTO and TPS613222A. By type, the board carries 18 resistors, 11 relays, 8 diodes, 6 ICs, 4 transistors and 4 jumpers.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for 4CH_relay_board_easyC designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-4CH-relay board easyC-hardware design
Soldered-4CH-relay board easyC-hardware design bill of materials (BOM)
60 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | PC357_OPTO | PC357_OPTO | U1, U2, U3, U4 |
| 1 | ATTINY404-SSNR | SOIC-14 | U5 |
| 1 | TPS613222A | tps613222a | U6 |
| 4 | NPN-SOT-23-3 | SOT-23-3 | Q1, Q2, Q3, Q4 |
| 4 | HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 4 | SMD-JUMPER-CONNECTED_TRACE_NOSLODERMASK | SMD-JUMPER-CONNECTED_TRACE_NOSLODERMASK | JP1, JP2, JP3, JP4 |
| 2 | easyC-SMD | easyC-connector | K1, K11 |
| 4 | SRD_RELAY_5V | SRD_RELAY_5V | K2, K3, K6, K7 |
| 4 | TERMINAL_KF235-5.0-3P | TERMINAL_KF235-5.0-3P | K4, K5, K8, K9 |
| 1 | HEADER-UPDI | HEADER-UPDI | K10 |
| 4 | purple | 0402LED | D1, D2, D5, D6 |
| 4 | M4_DIODA | M4_DIODA | D3, D4, D7, D8 |
| 1 | DFE201612E-2R2M=P2 | 0806L | L1 |
| 2 | CL10A226MPCNUBE | 0603C | C1, C2 |
| 1 | 0.1uF | 0603C | C3 |
| 1 | C1608X7S1A475K080AC | 0603C | C4 |
| 4 | 100R | 0603R | R1, R2, R9, R10 |
| 4 | 1k | 0402R | R3, R4, R11, R12 |
| 4 | 330R | 0603R | R5, R6, R13, R14 |
| 4 | 10R | 0603R | R7, R8, R15, R16 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | 0603R | R17, R18 |
Soldered-4CH-relay board easyC-hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-4CH-relay-board-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-4CH-relay board easyC-hardware design: common questions
What microcontroller does the Soldered-4CH-relay board easyC-hardware design use?
The Soldered-4CH-relay board easyC-hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the Soldered-4CH-relay board easyC-hardware design?
The Soldered-4CH-relay board easyC-hardware design measures 70 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-4CH-relay board easyC-hardware design?
60 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Soldered-4CH-relay board easyC-hardware design design files?
From the test-gh-syncer2/Soldered-4CH-relay-board-easyC-hardware-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Soldered-4CH-relay board easyC-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Can I test firmware for the Soldered-4CH-relay board easyC-hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k