Soldered-I2C-multiplexer-TCA9548A-breakout hardware design
test-gh-syncer2·Soldered-I2C-multiplexer-TCA9548A-breakout-hardware-design·CAD/V1.1.1/I2C_multiplexer_TCA9548A.kicad_pcb
About the Soldered-I2C-multiplexer-TCA9548A-breakout hardware design
Soldered-I2C-multiplexer-TCA9548A-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 54 mm, with 35 components from 8 distinct parts.
Other key parts include the TCA9548APWR. By type, the board carries 19 relays, 6 resistors, 3 jumpers, 2 capacitors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for I2C-multiplexer-TCA9548A-breakout designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-I2C-multiplexer-TCA9548A-breakout hardware design
Soldered-I2C-multiplexer-TCA9548A-breakout hardware design bill of materials (BOM)
35 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA9548APWR | TSSOP-24 | U1 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 3 | SMD_JUMPER | SMD_JUMPER | JP1, JP2, JP3 |
| 10 | easyC-SMD | easyC-connector | K1, K2, K6, K7, K10, K11, K14, K15 +2 |
| 9 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K3, K4, K5, K8, K9, K12, K13, K16 +1 |
| 1 | 100N 100n | 0603C | C1 |
| 1 | 10U 10u | 1206C | C2 |
| 6 | 10K 10k | 0603R | R1, R2, R3, R4, R5, R6 |
Soldered-I2C-multiplexer-TCA9548A-breakout hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-I2C-multiplexer-TCA9548A-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-I2C-multiplexer-TCA9548A-breakout hardware design: common questions
How big is the Soldered-I2C-multiplexer-TCA9548A-breakout hardware design?
The Soldered-I2C-multiplexer-TCA9548A-breakout hardware design measures 38 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-I2C-multiplexer-TCA9548A-breakout hardware design?
35 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-I2C-multiplexer-TCA9548A-breakout hardware design design files?
From the test-gh-syncer2/Soldered-I2C-multiplexer-TCA9548A-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-I2C-multiplexer-TCA9548A-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979